What years did Dodge use the G56?

Dodge’s Use of the G56 Transmission
The G56 manual transmission was utilized by Dodge in specific truck models for a certain period. Here are the details based on the information provided in the search results:
Years of Use:
– The G56 manual transmission was used in Dodge Ram trucks from the following years:
– 2005 – 2018 for Ram 2500 trucks
– 2005 – 2018 for Ram 3500 trucks
– 2008 – 2018 for Ram 4500 trucks
– 2008 – 2018 for Ram 5500 trucks
It’s important to note that the G56 did not return to the Ram options sheet for the 2019 model year, and there have been no plans to reintroduce a manual transmission option.
The G56 transmission was designed for light and medium-duty diesel trucks and was a replacement for the New Venture NV5600 transmission, which was used by Dodge from 1998 through 2005 in 2500 and 3500 series trucks.
The G56 transmission was known for its torque capacity, lightweight design, and smooth shifting characteristics. However, concerns have been raised about its performance when the engine output is increased above the stock level, as it has been known to fail prematurely due to increased torque.
In summary, Dodge used the G56 manual transmission in their Ram truck models from 2005 to 2018, with the transmission not being available for the 2019 model year and beyond.
If you have any further questions or need additional information, feel free to ask!

What transmission does a 07 6.7 Cummins have?

Aisin: The Aisin 6-speed automatic is one of the transmissions available with Ram’s 6.7L Cummins turbo-diesel engine. This engine produces up to 400 hp and 1,000 lb-ft of clean-diesel torque. With the Aisin transmission, it can tow 31,000 pounds.

What transmission is a Ram 2500 with the 6.7 Cummins?

six-speed automatic transmission
AVAILABLE 6.7L CUMMINS® TURBO DIESEL I6 ENGINE
With the six-speed automatic transmission.

What year did Dodge use NV4500?

The New Venture Gear 4500, colloquially known as NV4500, is a 5-speed manual transmission manufactured by New Venture Gear and used in General Motors and Chrysler products from 1991 to 2007.

What is a G56 rated for?

From what I have read the manufacturer rates the g56 up to 600 ft lbs of torque which who knows if that’s accurate or not.

What year Cummins have a G56 transmission?

The G56 was introduced in 2005, featuring a lightweight aluminum case and a significantly higher input torque capacity than its predecessor, the NV5600. Interestingly, both transmissions were offered simultaneously for the 2005 model year, with the NV5600 being phased out by the start of 2006.

Is the G56 transmission good?

The G56 is a fairly strong transmission – they were designed to work in medium duty trucks, after all – but anytime you start doubling & tripling the power throughput the service life is going to be reduced.

What was the problem with the G56?

A large percentage of G56 equipped trucks are having failures not far past the 100,000 mile mark. Failures seem to be 3rd, 4th, and 6th gears, the front mainshaft bearing, and case cracking at the bellhousing.

What transmission does a 2008 6.7 Cummins have?

To accommodate the power and torque of the new 6.7-liter turbodiesel engine, a choice of transmissions is offered: a standard six-speed manual gearbox or an available 68RFE six-speed automatic with Electronic Range Select that enables customers to select gears that best match driving conditions.

What years did Dodge use the NV5600?

The NV5600 is a Heavy Duty close ratio 6-speed manual transmission that was used in 1999-2005 Dodge RAM 2500 and 3500 Series ¾ ton and 1 ton Trucks with the 5.9L Cummins Engines. It was manufactured by New Venture Gear, a division of Magna Powertrain.

What was the last year of the G56?

The G56 was available behind both the 5.9- and 6.7-liter Cummins diesel engines, but not all of them. In 2019, the 3/4- and 1-ton manual transmission era was over.