What year did Chevy use short water pump?

Year Chevy Used Short Water Pump
Chevy used the short water pump on car applications up through the 1968 model year, and until 1972 for light trucks, except for the Corvette, which used the standard short pump through 1970.
Conclusion
Chevy used the short water pump on car applications up through the 1968 model year and until 1972 for light trucks, except for the Corvette, which used the standard short pump through 1970.

Are short and long water pumps interchangeable?

Short and long shaft pumps are not interchangeable. Here’s how to tell. Short pump is 5-3/4″ from block surface to hub. Long pump is 7-5/16″ from block surface to hub.

Is big block Chevy small block Chevy water pump the same?

One of the questions we commonly get is what water pump is right for my Chevy V8, whether it be a small block or big block Chevy. The reason for this is Chevy developed two different types of water pumps for these engines: a short-type and a long-type.

How to tell the difference between a Chevy long and short water pump?

In previous model years. But due to the large number of engine swaps done over the years you don’t want to purchase your new pump based on the model year of your vehicle.

How do you determine the size of a water pump?

When considering the pump you might need, you need to try to work out what your water demand will be. You will count the number of taps, water using appliances, irrigation and any other water use that might be used at any one time. This will determine the total litres per minute you might need.

How do I know what kind of pump I have?

Luckily, your pump has all this information printed on it. To identify the model of your pump, you need to know the part number. Part numbers, also sometimes referred to as model numbers, can be found on your pump’s tag.

Did the 1968 Camaro have a long or short water pump?

All models of Chevy V8 engines from 1955 through 1968 came equipped standard with a short water pump. From 1969 and newer engines with v-belt drives into the 1980s had long water pumps.

Will a 305 water pump fit a 350?

Are they the same, and i need a distributor? Re: Are 305 and 350 water pumps the same? for the most part, belt setup makes a difference though for normal or reverse flow, but that goes for either engine, so other than that yes.

What determines the size of a water pump?

The most important factors to consider when sizing a water pump come down to GPM/PSI ratings, inlet/outlet size for water and hoses, how high you’ll need to pump the water (measured in vertical feet), referred to as total head lift, and how far you’ll need to pump the water horizontally.

Does water pump size matter?

Efficiency: One of the most critical reasons for choosing the right pump size is efficiency. A pump that is oversized for the task can lead to excessive energy consumption. On the other hand, an undersized pump may struggle to meet the required flow rate and pressure, leading to inefficiency.

Are all Chevy 350 water pumps the same?

And to answer your initial question, NO all water pumps are not the same. You can buy ‘reverse flow’ pumps, hi-volume pumps, etc. etc. But, unless you intend to race this vehicle, just put a stock water pump back on….IF you need one.