What wheels will fit a Dodge Journey?

What wheels will fit a Dodge Journey?
To determine what wheels will fit a Dodge Journey, it is important to consider factors such as the rim size, bolt pattern, offset, and backspacing. Here is some information that can help you make an informed decision:
– The Dodge Journey has different wheel sizes available depending on the year and trim level. The rim sizes commonly found on the Dodge Journey include 16 inches, 17 inches, 18 inches, 19 inches, and 20 inches.
– The bolt pattern for the Dodge Journey is 5x127mm, which means it has 5 lug nuts and a bolt circle diameter of 127mm.
– The offset for the Dodge Journey is typically +40mm, which refers to the distance between the centerline of the wheel and the mounting surface. A positive offset means the mounting surface is towards the front face of the wheel, while a negative offset means it is towards the back face of the wheel.
– The backspacing for the Dodge Journey is approximately 5.43 inches, which is the distance between the mounting surface and the back edge of the wheel.
It is important to note that these specifications may vary depending on the specific year and trim level of the Dodge Journey. To ensure a proper fit, it is recommended to consult the owner’s manual or contact a reputable dealer or tire shop for accurate and up-to-date information.
Please note that the information provided is based on general specifications and may not apply to all Dodge Journey models. It is always recommended to consult the owner’s manual or contact a professional for specific fitment information.

Are Dodge and Ford 8 lug rims interchangeable?

yes all 8-lug patterns are the same but.. dodge uses a larger center hole than ford or chev. you can use dodge chev or ford rims on a ford or chev, however only dodge rims will fit a dodge. however, don’t load the axle heavy setup like this, it will break the lugs.

Are Chevy and Dodge lug nuts the same?

In some cases, yes, the Doge and Chevy lug nuts are the same. You can use Dodge lug nuts to fasten Chevy wheels, especially if the thread pitch, seat type, and length are the same. Most Dodge and Chevy vehicles use steel wheel nuts. The most common thread sizes that are used by Dodge and Chevy cars are M14x1.

Is Dodge and Chevy same lug pattern?

If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs.

Can I put a different wheel on my car?

To fit correctly, offer the proper driving dynamics, and ensure safety, the wheel must have not only the proper bolt pattern, but also the proper width, centerbore, offset, and load capacity for the vehicle.

What bolt pattern is a Dodge Journey?

Dodge Journey Bolt Pattern – Generations:

Generation	Production Years	Bolt pattern
JC49 [2008 .. 2020]	2008-2020	5×127
2021 .. 2025	2021-2024	5×108

Are Dodge and Ford wheels the same?

The Dodge has an 8x165mm bolt pattern, and the Ford has an 8x170mm pattern. Sell the wheels and buy the things you want for your new truck, then. Wheels should have 8-by-6.5-inch lug patterns. However, the center bore of the wheel might make it impossible to bolt it to the truck.

Do Dodge and Chevy rims interchange?

The center hole on GM is smaller than Ford and dodge and will not fit. For years you could put a ford or dodge stock wheel on a chevy but not the opposite. Also the newer trucks have changed the circumference so the bolt holes are not the same.

What wheels are compatible with my car?

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

Will a 5×127 fit a 5×5?

Is 5×127 the same as 5×5? We hear this question a lot, and the answer is: yes! 5×127 is the metric variant of 5×5 wheels.

Can I fit any wheels to my car?

Rims come in various sizes, bolt patterns, and offsets, which must match the specifications of the vehicle they’re intended for. Installing rims that don’t fit properly can lead to safety issues, affect handling, and potentially damage the vehicle.