What wheels fit a Ford Mondeo?

Wheels for Ford Mondeo
If you’re looking for information about the wheels that fit a Ford Mondeo, I can provide you with some details. The specific wheels that fit a Ford Mondeo can vary depending on the model year and other factors. Here are some key points to consider:
– The wheel fitment for each year and model of the Ford Mondeo can be found on websites like Wheel-Size.com, sizemywheels.com, and AlloyWheels.com.
– The recommended wheel sizes and parameters for the Ford Mondeo can also be found on these websites.
– The bolt pattern for the Ford Mondeo is 4×108 for model years 1993-2000 and 5×108 for model years 2000-2022.
– The rim diameter for the Ford Mondeo can range from 10 to 20 inches, but it’s important to check if the specified wheel diameter can fit your specific Mondeo model with the tires fitted onto the rims.
– When looking for wheels for your Ford Mondeo, you can choose from OEM brands manufactured by Ford, authorized OEM brands, third-party companies that manufacture OEM-style, custom, and performance wheels, as well as more generic or unbranded wheels that fit a range of models.
It’s important to note that the information provided here is a general overview, and it’s always recommended to consult the specific wheel fitment data for your Ford Mondeo model and year to ensure compatibility.

Is a Mondeo bigger than a focus?

The Mondeo is taller and just as wide, but not quite as long. A quick comparison of spec sheets proves it’s not much lighter either, despite the Falcon sporting a cast-iron engine that’s literally twice the size. The front three-quarter especially makes the Mondeo look tough.

Is Ford Mondeo the same as Ford Fusion?

The fourth generation of the Ford Mondeo, (Mk 5 in the UK, codenamed MD in Australia) is a range of mid-size cars produced by Ford from 2013 to 2022. Developed under the model code CD391, it is a rebadged variant of the American-market Fusion sold in Europe, Latin America, China and Australia.

What bolt pattern does Ford use?

Large Ford Pattern | 5 on 5.5 inches
Early Ford passenger cars use a 5×5. 5-inch bolt pattern, which can also be listed as 5×5-1/2 inches. Later, the 5×5. 5-inch bolt pattern was only used on Ford trucks.

Will Chevy rims fit on a Ford?

In simple terms, yes. Check that the spacing is correct to fit over break calibers (mostly anything over a 16in rim will) and wont rub the inside of the wheel well. If it is 4×4 also check your front locking hubs so that it fits over them, Chevy, Dodge, Ford, and Jeep trucks might have different sizes on these.

Are Ford and Dodge wheels interchangeable?

No, the Dodge is a 8x165mm bolt pattern and the Ford is 8x170mm. Sell the wheels and buy what you want for your new truck.

Do Ford Focus wheels fit Mondeo?

Yes they should do mate. From memory the mk3 mondeo is a 5×108 pcd which is the same as the focus.

What stud pattern is Ford Mondeo?

Ford – Mondeo (2000 – 2007)

PCD:	5×108
Center bore:	63.4
Offset:	52.5
Mounting:	Nut – 12×1,50
Wheel torque steel:	85 Nm / 63 ft-lb

What vehicle has a 5×114 bolt pattern?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

What wheel drive is a Ford Mondeo?

front-wheel-drive

Ford Mondeo
Body style	4-door sedan 5-door liftback 5-door estate
Layout	Front-engine, front-wheel-drive (1993–present) Front-engine, all-wheel-drive (1993–2000, 2007–2022)
Chronology
Predecessor	Ford Sierra/Ford Scorpio (Europe) Ford Tempo/Mercury Topaz (North America) Ford Telstar (Asia and Australia)

What wheels fit Ford Mondeo mk4?

• 16″
• 17″
• 18″
• 19″
• 20″