What wheels fit a Dodge Dart?

Wheels for Dodge Dart
The Dodge Dart has specific wheel specifications that need to be considered when looking for compatible wheels. Here are some key points to keep in mind:
1. Wheel Size and Specs:
– The Dodge Dart wheel size chart serves as the fitment guide when you need to replace the OEM wheels or upgrade the vehicle with an aftermarket option. It helps figure out the possible stock and custom offset range, wheel width parameters, and the Dodge Dart bolt pattern that is important for the correct fitment.
2. OEM Replacement Wheels:
– Stock (OEM) Replacement Wheels or Rims for Dodge Dart 2013 – 2016 have specific specifications, such as size, lugs, bolt pattern, and offset. For example, a specific OEM wheel for the Dodge Dart 2013-2016 has the following specifications:
– Size: 18×7.5
– Lugs: 5
– Bolt Pattern: 110mm
– Offset: 46mm.
3. Aftermarket Options:
– When considering aftermarket options, it’s important to pay attention to the wheel diameter, width, and offset for the ideal fitment. Custom rim and tire packages are available, and it’s essential to ensure that the chosen wheels meet the necessary specifications for the Dodge Dart.
4. Considerations for Fitment:
– It’s crucial to ensure that the wheels are a perfect match for the Dodge Dart. Attention should be given to the wheel diameter, width, and offset to guarantee proper fitment.
In summary, when looking for wheels that fit a Dodge Dart, it’s important to consider the specific wheel size, bolt pattern, offset, and other specifications to ensure compatibility with the vehicle.
If you have any specific questions about particular wheel options or need further assistance, feel free to ask!

Are Dodge and Chevy rims compatible?

The center hole on GM is smaller than Ford and dodge and will not fit. For years you could put a ford or dodge stock wheel on a chevy but not the opposite. Also the newer trucks have changed the circumference so the bolt holes are not the same.

Are Dodge and Chevy bolt patterns the same?

If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.

What is the bolt pattern on a 2013 Dodge Dart?

5×110
What bolt pattern does the Dodge Dart use? The Dodge Dart typically comes with a 5×110 bolt pattern. As one of the more popular bolt patterns on the pavement today, you’ll find plenty of 5×110 rims for your Dart.

Can you put different size rims on a car?

TSW explains that sometimes, it’s acceptable to have differently sized tires and rims for the front and back wheels, which is called staggered tires. You’ll most often see this with muscle cars, such as the Mustang, Challenger, and Camaro.

What rims fit on a Dodge Dart?

The Dodge Dart has a range of OE rim sizes, including 16-inch rims, 17-inch rims and 18-inch rims. Found on many vehicle types, including luxury sedans, sports cars and daily drivers, many of the best wheel manufacturers make rims in these sizes.

How do I know what rims can fit my car?

First, start with the wheel size for your vehicle. You can find that on the sidewall of the tires on your original wheels or the inside frame of the driver’s door. Check out Tire Size Explained (Reading the Sidewall) for more. The wheel diameter (in inches or millimeters) is the fifth set of numbers and letters.

What wheel drive is Dodge Dart?

front-wheel drive
The Dodge Dart is a front-engine, front-wheel drive, four-door compact sedan that was manufactured and marketed by then FCA US LLC, a subsidiary of Fiat Chrysler Automobiles.

Do Dodge and Ford have the same bolt pattern?

The Dodge has an 8x165mm bolt pattern, and the Ford has an 8x170mm pattern. Sell the wheels and buy the things you want for your new truck, then. Wheels should have 8-by-6.5-inch lug patterns. However, the center bore of the wheel might make it impossible to bolt it to the truck.

Are Dodge and Chevy lug patterns the same?

ford and dodge have sae threads and chevy have metric, so the spacing is a little different. also the hub size is different. Maybe on the 1/2 ton trucks. On the 3/4 ton the Dodge and Chevy have the same lug pattern – 8 x 6 1/2″ (8 lugs on a 6 1/2 inch diameter).

Do rims have to be exact size?

They must be the same diameter or the tires cannot be mounted on them. The rim width should match the tire profile or the tire will wear unevenly. A too narrow rim will cause the tire to wear down the middle; too wide will wear the tire outer edges.