What weight oil does a Subaru take?

Subaru Oil Weight Recommendation
The recommended oil weight for a Subaru varies depending on the model and engine type. Here are the general guidelines based on the information provided in the search results:
– Non-Turbo Engines: For non-turbo engines, the recommended oil weight for newer Subaru models (2011 and later) is 0W-20 synthetic oil .
– Turbocharged Engines: Turbocharged engines in Subaru vehicles typically require 5W-30 synthetic oil.
It’s important to note that these are general recommendations, and it’s always best to consult the owner’s manual for the specific oil recommendation for your Subaru model and year. Additionally, the owner’s manual should be consulted for the proper oil change intervals and service requirements.
If you have a specific Subaru model in mind, I can provide more detailed information based on the model and year.
Is there anything else you’d like to know about Subaru oil recommendations?

What happens if I use 0W-20 instead of 5W 20?

The meaning of the numbers has to do with oil thickness (viscosity) the w stands for winter or cold. So basically when an engine calls for 5w20 it needs a weight of 5 when cold and 20 when hot. By putting 0w20 into it you are providing too thin of oil which can harm the engine until it warms up.

What happens if I put 5W-30 in my car instead of 5W 20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

Can you put 5W-30 in a Subaru?

What type of oil does a Subaru Forester take? The recommended Subaru Forester oil is best served by a 5W-30 synthetic motor oil, and thankfully, Subaru offers this as an OEM part that’s got the Subaru blessing right on it.

Can I use 5W-30 instead of 0W-20 for Subaru Forester?

If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.

What is the best oil to run in a Subaru?

Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.

Should a Subaru use synthetic oil?

Naturally aspirated engines in the newest Forester, Impreza, Legacy, Outback, and BRZ models as well as turbocharged models require Subaru Synthetic Motor Oil (or its equivalent).

Can I use 5W-30 instead of 0W-20?

Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.

What happens if I use 5W-30 instead of 5W-20?

Switching from 5W30 to 5W20 or vice versa might not cause immediate harm to your engine, especially under normal driving conditions. However, continuous use of the wrong oil can lead to issues like reduced fuel efficiency, decreased engine performance, and potentially increased engine wear over time.

Why does Subaru use 0W-20 oil?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

Can I put 5W-30 instead of 0w20 Subaru Outback?

Like the Crosstrek, the oil for the Subaru Outback needs to be an API classification SN or ILSAC GF-5. Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn’t available, you can use either 5W-30 or 5W-40 conventional oil.