The Ford Pinto engine was available in several displacements, including the following:
– 1.3 L (1,294 cc)
– 1.6 L (1,593 cc)
– 1.6 L (1,598 cc)
– 1.8 L (1,796 cc)
– 2.0 L (1,993 cc) and later 2.0 L (1,998 cc).
The Pinto engine was phased out towards the end of the 1980s due to emission requirements and was replaced by the CVH engine and DOHC engine. The final Pinto engines used in Ford of Europe production vehicles were the 1.6 L (1,598 cc) versions used in the Sierra until 1991, and the last 2.0 L (1,998 cc) units were used in the Transit until 1994.
The Pinto engine was also used in various Ford models, including the Ford Scorpio/Granada Mk3, Ford Transit, and TVR Tasmin 200.
Contents
- What is the difference between a Pinto and a Lima engine?
- What is the Chevy version of the Pinto?
- How much HP does a Pinto have?
- How much horsepower does a 1974 Ford Pinto have?
- What was the flaw of the Ford Pinto?
- What engines did Ford Pinto have?
- How much did a 1976 Ford Pinto cost?
- How big is the Ford 2.0 Pinto engine?
- Is the Ford Pinto a good engine?
- What was Chevrolet equivalent to Ford Pinto?
What is the difference between a Pinto and a Lima engine?
It looks like a Pinto, with it’s inline 4cyl 8 valve setup and iron block and head, but the Lima is, aside from de-stroked race engines late small bore versions, 2.3ltr, 0.3ltr more than the biggest production Pinto, which is a bonus for tuning from the outset.
What is the Chevy version of the Pinto?
| Chevrolet Vega | |
|---|---|
| Manufacturer | Chevrolet (General Motors) |
| Also called | Vega 2300 |
| Production | 1970–1977 |
| Model years | 1971–1977 |
How much HP does a Pinto have?
| Ford Pinto engine | |
|---|---|
| Power output | 54–205 hp (40–153 kW) |
| Torque output | 90–240 N⋅m (66–177 lb⋅ft) |
| Chronology | |
| Predecessor | Ford Model T engine (North America) Essex V4/Taunus V4 engine |
How much horsepower does a 1974 Ford Pinto have?
New for ’74 was the 2.3-liter version of the Ford Europe-designed Lima engine, rated at 86 horsepower.
What was the flaw of the Ford Pinto?
Iacocca’s specifications for the design of the car were uncompromising: “The Pinto was not to weigh an ounce over 2,000 pounds and not cost a cent over $2,000.” During design and production, however, crash tests revealed a serious defect in the gas tank. In crashes over 25 miles per hour, the gas tank always ruptured.
What engines did Ford Pinto have?
| Ford Pinto | |
|---|---|
| Related | Mercury Bobcat Ford Mustang II |
| Powertrain | |
| Engine | 97.6 cu in (1.6 L) Kent I4 122.0 cu in (2.0 L) EAO I4 140.4 cu in (2.3 L) L23 I4 170.9 cu in (2.8 L) Cologne V6 |
| Transmission | 4-speed manual 3-speed C3/”Selectshift/Cruise-O-Matic” automatic |
How much did a 1976 Ford Pinto cost?
18—The Ford Motor Company announced today that a special 1976 model of its subcompact Pinto would be priced at $2,895, making it the lowest‐priced car buil in the United States.
How big is the Ford 2.0 Pinto engine?
2.0. The 2.0 litre version was a narrower-bore version of the original 2.3 liter “Lima” four. Bore and stroke are 89.3 and 79.4 mm (3.52 and 3.13 in), respectively, for an overall displacement of 2.0 L; 121.4 cu in (1,990 cc).
Is the Ford Pinto a good engine?
As I said, the 2.0 liter OHC four is the desirable Pinto engine, but only if it’s mated to the four speed manual. German designed and built, the engine provided a good power to weight ratio, smooth power delivery, and a fat torque band.
What was Chevrolet equivalent to Ford Pinto?
In reality, the names Pinto and Vega became running jokesOpens a new window after these nearly identical beasts underperformed in terms of sales, performance and reliability.
