AHG Auto Service » Make » Ford » What type transmission fluid is in the 2010 Ford Transit Connect?

What type transmission fluid is in the 2010 Ford Transit Connect?

Type of Transmission Fluid for 2010 Ford Transit Connect
The 2010 Ford Transit Connect requires a specific type of transmission fluid as stipulated by the owner’s manual. The manual typically specifies a type such as Dexron, Mercon, Allison, Type-F, or CVT transmission fluid. It is crucial to use the exact type of transmission fluid mentioned in the owner’s manual, and if using a different brand of fluid, it should match the type specified in the manual.
When adding transmission fluid to the 2010 Ford Transit Connect, it’s important to add it slowly as the transmission fluid capacity is reached quickly, and it can be difficult to remove excess fluid if overfilled.
In summary, the specific type of transmission fluid required for the 2010 Ford Transit Connect can be found in the owner’s manual, and it’s essential to adhere to the type specified in the manual when adding or replacing transmission fluid.
If you have any further questions or need additional assistance, feel free to ask!

How many quarts of oil does a 2010 Ford Transit Connect take?

4.5 quarts
Capacity: With filter 4.5 quarts. After refill check oil level.

What kind of transmission is in the 2010 Ford Transit Connect?

The Ford Transit Connect comes exclusively with a 136 horsepower 2.0-liter I-4 mated to a 4-speed automatic transmission.

What type of oil does a 2010 Ford Transit Connect take?

The 2010 Ford Transit has an oil capacity of 4.5 quarts. Using Motorcraft Premium Synthetic Blend or Full Synthetic motor oil is preferred with a viscosity rating of SAE 5W-20.

What oil is recommended for Transit Connect?

FORD TRANSIT VAN CONNECT (02+) BRITOIL FULLY SYNTHETIC ENGINE OIL 5W30.

What is the most common problem with a Ford Transit Connect?

In conclusion, while the Ford Transit Connect is a popular and reliable compact van for commercial use, it is not immune to problems. The most common issues include transmission, electrical, suspension, engine and braking problems, which can result in reduced performance, decreased fuel economy, and safety concerns.

How much transmission fluid does a 2010 Ford Transit Connect hold?

Automatic Transmission Fluid
Capacity: 4 speed 4F27E Total Fill 7.1 quarts. Capacity: 3.2 quarts Initial Fill.

What year did Ford Transit Connect avoid?

Aside from the 2012 redesign, some 2013-2021 Transit Connects have also been reported to have transmission issues. Early in 2021, Ford issued a recall for over 192,000 2013-2021 Transit Connects due to their high probability of rolling away when in park mode.

How long does a 2010 Ford Transit Connect last?

The Ford Transit has an expected mileage of around 150,000 miles. However, if you take good care of your van and ensure that it gets all the regular maintenance it needs, you can expect a mileage of around 300,000 miles. Some van owners have reported actively using their vehicles for 10 to 15 years.

What transmission is standard on Transit Connect?

six-speed automatic transmission
All trims come standard with front-wheel drive (FWD) and have a six-speed automatic transmission.

How much transmission fluid does a 2012 Ford Transit Connect take?

For Automatic Transmission: 4F27E….MLV

Capacity: 4 speed 4F27E Total Fill 7.1 quarts.
Capacity: 3.2 quarts Initial Fill.
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment