What type of transmission fluid does a Ford Flex take?

Transmission Fluid for Ford Flex
The type of transmission fluid recommended for the Ford Flex depends on the specific model year and transmission type. It’s important to use the type of fluid recommended in the owner’s manual of your Flex. Here are some details based on the search results:
Recommended Transmission Fluid Types:
– If the recommended standard for your Flex is GL-4, you should use a GL-4 oil to avoid damaging the bronze synchronizers of your transmission with sulfur found in GL-5 oils. Automatic transmission fluids are typically red or green to distinguish them from other types of oils.
– For Ford cars since 1999, Mercon V fluid is recommended.
– The Flex switched from Mercon V to Mercon LV for the 2010 model year. It’s crucial not to mix up the two types of fluid.
– Valvoline and Castrol make a Mercon LV compatible fluid.
– The owner’s manual for the 2019 Flex suggests changing the transmission fluid at 150,000 miles, but it’s advised to ignore this interval and change the fluid earlier to prevent potential damage.
It’s important to verify the specific transmission fluid type recommended for your Ford Flex based on its model year and transmission type. You can find this information in your owner’s manual or by referring to Ford’s Chemicals and Lubricants website.
Always ensure that the transmission fluid you use meets the specifications outlined in the owner’s manual to maintain the optimal performance and longevity of your vehicle’s transmission.

Can you use Dexron 3 transmission fluid in a Ford?

LUBRIPLATE Dexron III/Mercon is a premium fluid fully qualified to cover current requirements for both General Motors and Ford.

Is Mercon and Mercon LV the same?

The difference most people will notice is the viscosity. Mercon’s kinematic viscosity, KV, at 100 C is about 7.5 cP. Mercon LV, the LV stands for low viscosity, KV is 6.0 cP. There is also a Mercon ULV, which stands for ultra low viscosity.

What is the best transmission fluid for Ford Flex?

Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No. XT10QLVC) The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

What transmission does a Ford Flex have?

The Ford Flex is powered by two different 3.5 L V6 engines, both paired to a 6-speed automatic transmission.

Is Mercon the same as ATF?

Valvoline Mercon V ATF is the conventional automatic transmission fluid that has been uniquely engineered to extend the life of automatic transmissions in vehicles that specify all Mercon V and additional Mercon applications.

How many quarts of transmission fluid does a Ford Flex take?

12.15 qt
Capacities and Specifications

Item	Capacity
Power Transfer Unit (PTU) fluid.	12.7 ± 1.7 fl oz (375 ± 50 ml)
Automatic transmission fluid.	12.15 qt (11.5 L)1
Windshield washer fluid.	Fill as required
Fuel tank.	18.5 gal (70 L)

Is dexron and Mercon transmission fluid the same?

In short, the answer is no, and it’s why you want to use an OE approved fluid specific to your car. Dexron fluids are used by GM. Ford and Mazda designed their transmissions for Mercon. Other import brands like Honda (DW-1) and Toyota (ATF Type-T) have their own specific fluid too.

What type of ATF does Ford use?

MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.

Do Ford Flex have transmission issues?

Common Ford Flex Transmission Problems
There are a number of design flaws in this transmission, and any one of them could be causing these symptoms. Another common problem is overheating. This happens when the moving parts inside the transmission are creating more friction heat than the ATF can remove.

How often do you change the transmission fluid in a Ford Flex?

For a manual transmission, most manufacturers say you need to change the fluid every 30,000 – 60,000 miles.