What type of oil is Subaru oil?

Subaru recommends using synthetic oil for their vehicles. The specific type and viscosity of oil may vary depending on the Subaru model and year. Here are some examples of the recommended oil types for different Subaru models:
– Subaru Forester XT 2011 – 2018: 5W-30 Synthetic Oil
– Subaru Impreza 2002 – 2011: 5W-30 Conventional Oil
– Subaru Impreza 2012 – 2021: 0W-20 Synthetic Oil
– Subaru Legacy & Outback: The specific oil type and viscosity may vary. It is recommended to consult the owner’s manual or contact a Subaru service center for the correct oil type for your specific model.
It’s important to note that if your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent, it is required to use synthetic oil.
Please refer to your owner’s manual or contact a Subaru service center for the most accurate and up-to-date information regarding the recommended oil type for your specific Subaru model.

Why does Subaru use 0W-20 oil?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

Do Subarus take synthetic or non synthetic oil?

If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.

What kind of oil do Subarus use?

Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead.

What brand of synthetic oil for Subaru?

Choose Mobil 1™ motor oil for your Subaru. We offer a full range of synthetic and synthetic blend motor oils to keep your engine in peak condition throughout its lifetime.

What is the best motor oil for Subaru?

For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.

Do Subarus require special oil?

The correct Subaru Outback oil depends upon whether your Outback engine is a 4-cylinder or 6-cylinder. 4-cylinder engines require OW-20 synthetic motor oil and 6-cylinder engines require 5W-30 synthetic motor oil.

What happens if you put non synthetic oil in a car that takes synthetic?

Can You Mix Conventional Oil With Synthetic? The short answer is yes. There is no danger or risk of combustion, and mixing the two types of oil won’t harm your engine. However, it’s important to note that if you do mix the two, the conventional oil can keep the synthetic from performing to its fullest potential.

What will happen if I use 5w30 instead of 0w20?

No car “requires” 0W-20. It’s a recommendation, not a requirement. 5w30 will be thicker (more viscous). It will offer better projection to bearings and some other wear surfaces at the expense of slightly worse cooling of some other parts and increase oil pressure delay at extremely cold temperatures.

Can I use 5W-30 instead of 0w20 in Subaru Forester?

If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.

What happens if I use 0W-20 instead of 5W-20?

The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application. **Offers same protection as 5W but also provides faster flow and better fuel economy.