Subaru recommends using synthetic oil for their vehicles. The specific viscosity of the oil depends on the model and engine type. For most Subaru models, including the 2011 or newer Forester, 2012 or newer Impreza, and 2013 or newer Outback, Legacy, Crosstrek, Ascent, or BRZ, Subaru recommends using 0W-20 viscosity synthetic oil. This oil is designed for improved fuel economy and increased power. However, for the turbocharged engine in the WRX and WRX STI, Subaru recommends using 5W-30 synthetic oil, which provides increased protection against breakdown and superior lubrication for optimal fuel economy.
It’s important to note that the oil change frequency may vary depending on driving conditions. If your vehicle is subjected to extreme driving conditions, such as frequent towing, driving in dusty or off-road environments, or driving in stop-and-go traffic, Subaru recommends changing the oil more frequently, typically every 4,000-5,000 miles.
Always consult your owner’s manual for the specific oil recommendation for your Subaru model, as different models and engine types may have slightly different requirements.
Contents
- Is Mobil 1 good for Subaru?
- What oil does Subaru use from factory?
- Can I use 5W 30 instead of 0W 20 for Subaru Forester?
- What will happen if I use 5w30 instead of 0w20?
- Does Subaru use synthetic oil from factory?
- What oil brand is recommended for Subaru?
- Can I use Mobil 1 in my Subaru?
- Do Subarus require full synthetic oil?
- Why does Subaru use 0W-20 oil?
- Can I use 5W-30 instead of 0W-20 for Subaru Forester?
Is Mobil 1 good for Subaru?
One the world’s leading synthetic motor oil brand and mobiles best synthetic offering. With over 40 years of science and research in every bottle Mobil 1 delivers exceptional performance.
What oil does Subaru use from factory?
Subaru Oil Guide:
Model | Subaru Oil Required | Capacity |
---|---|---|
Subaru Legacy & Outback 6 Cyl. 2002 – 2019 | 5W-30 Conventional Oil | 6 – 6.9 Quarts |
Subaru Legacy & Outback XT (Turbo) 2020 – 2021 | 0W-20 Synthetic Oil | 4.8 Quarts |
Subaru WRX 2002 – 2010 | 5W-30 Conventional Oil | 4.4 – 5 Quarts |
Subaru WRX 2011 – 2020 | 5W-30 Synthetic Oil | 4.4 – 5.4 Quarts |
Can I use 5W 30 instead of 0W 20 for Subaru Forester?
If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.
What will happen if I use 5w30 instead of 0w20?
No car “requires” 0W-20. It’s a recommendation, not a requirement. 5w30 will be thicker (more viscous). It will offer better projection to bearings and some other wear surfaces at the expense of slightly worse cooling of some other parts and increase oil pressure delay at extremely cold temperatures.
Does Subaru use synthetic oil from factory?
Starting in 2011 when Subaru changed from Rubber timing belts to timing chains in the 4 cylinder motors, the factory switched to full synthetic motor oils, 0w/20. The chain driven 6 cylinder motor, still uses 5/30 syntec blend.
What oil brand is recommended for Subaru?
Choose Mobil 1™ motor oil for your Subaru. We offer a full range of synthetic and synthetic blend motor oils to keep your engine in peak condition throughout its lifetime.
Can I use Mobil 1 in my Subaru?
Mobil 1 is fine. Also maybe they just use Mobil 1 stickers.
Do Subarus require full synthetic oil?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
Why does Subaru use 0W-20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Can I use 5W-30 instead of 0W-20 for Subaru Forester?
If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.