Oil Type for Dodge Avenger
The Dodge Avenger requires different oil types depending on the engine. Here are the specific oil types for different engine types:
– For the 3.6L 6-cylinder engine (engine code ERB), the Dodge Avenger takes 5.9 quarts (with filter) of 5W-30 synthetic oil.
– For the 2.7L 6-cylinder engine (engine code EER), the Dodge Avenger takes 5.5 quarts (with filter) of 5W-20 synthetic oil.
It’s important to note that the recommended oil type may vary depending on the year of the Dodge Avenger, so it’s advisable to consult the specific recommendations for each year.
Contents
- Can I use 5W-30 on Dodge Avenger?
- How many quarts does a 2008 Dodge Avenger take?
- Can I put 5w30 in my car instead of 5w20?
- What kind of oil does a 2011 Dodge Avenger take?
- What kind of oil does a Dodge Avenger 2010 take?
- How much is an oil change for a 2013 Dodge Avenger?
- What oil does 2008 Dodge Avenger take?
- What is the best oil for a 2012 Dodge Avenger?
- What kind of oil does 2013 Dodge Avenger take?
- What happens if I put 10W-30 in my car instead of 5W-30?
Can I use 5W-30 on Dodge Avenger?
These are the easiest damn cars to change oil in that I’ve ever worked on, and hope they keep this style for generations to come. Tpuls said: I’ve used Mobil 1 5W-30 Full Synthetic and the filter I usually go with is WIX. So far I’ve never had any problems and the oil seems to last forever without getting very dark.
How many quarts does a 2008 Dodge Avenger take?
The 2008 Dodge Avenger takeS4. 2 liters (4.5 quarts) of SAE 5W-30 engine oil. This is a very popular synthetic fluid because it’s suitable for a wide variety of engines in a large range of climates. The manual for this vehicle says to change the oil every 6,000 miles or 6 months, whichever You arrive to first.
Can I put 5w30 in my car instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
What kind of oil does a 2011 Dodge Avenger take?
5W-30
6 liters 5W-30 Dodge Avenger motor oil, oil filter, and hardware for 2011-2012 3.6L 24V V6 applications. Meets Chrysler MS-6395 motor oil quality standards.
What kind of oil does a Dodge Avenger 2010 take?
Notes: Full synthetic. 5W-20.
How much is an oil change for a 2013 Dodge Avenger?
$75 – $91. “Dealer” refers to service centers that specialize in one or two makes and sell those vehicles. As a franchise dealer: They use top-quality manufacturer-recommended or “official” parts.
What oil does 2008 Dodge Avenger take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
What is the best oil for a 2012 Dodge Avenger?
The recommended oil type for the 2012 Dodge Avenger is SAE 5W-20. With a dry filter, You will need 4.23 liters (4.5 quarts). Dodge recommends changing the oil in this vehicle every 5,000 miles or 5 months, whichever comes first.
What kind of oil does 2013 Dodge Avenger take?
5W-20
Oil Grade: SEO11
Viscosity: | All TEMPS….5W-20 |
---|---|
Capacity: | With filter 4.5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…30 ft/lbs |
What happens if I put 10W-30 in my car instead of 5W-30?
Using 10W-30 instead of 5W-30, however, could make cold starts more difficult. It’s helpful to think of the “W” as standing for “winter.” The lower the oil’s “W” viscosity, the more readily it will flow when cold. In this case, 5W-30 will flow more easily at startup than 10W-30.