The Ford Flex uses 5W-20 engine oil. This oil type is recommended by Ford and provides optimum fuel economy and durability performance for the vehicle’s engine . It is important to note that the oil capacity of the Ford Flex varies depending on the engine code, transmission type, year of release, and trim level. The oil capacity ranges from 5.5 quarts (5.3 liters) to 6.0 quarts (5.7 liters) . It is recommended to consult the vehicle’s manual or a trusted mechanic to determine the specific oil capacity for your Ford Flex.
Contents
- What kind of oil does a Ford Flex take?
- What oil does a 2011 Ford Flex take?
- What kind of oil does a 2009 Ford Flex take?
- Can I use 5w30 instead of 5w20 in my Ford?
- What is the best oil to use in a Ford?
- Does Ford use full synthetic oil?
- What is the best oil for a 2012 Ford Flex?
- What type of oil does a 2010 Ford Flex take?
- What brand engine oil is best for Ford?
- How often do you change the oil in a Ford Flex?
What kind of oil does a Ford Flex take?
Oil Grade: SEO89
| Viscosity: | Above -20 F .5W-30 – To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-30 oil meeting WSS-M2C963-A1. |
|---|---|
| Capacity: | With filter 6 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…20 ft/lbs |
What oil does a 2011 Ford Flex take?
Oil Grade: SEO60
| Viscosity: | All TEMPS….5W-30 |
|---|---|
| Capacity: | With filter 5.5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…20 ft/lbs |
What kind of oil does a 2009 Ford Flex take?
5W-20
Notes: Full synthetic. 5W-20. 1 quart.
Can I use 5w30 instead of 5w20 in my Ford?
In 2011, Ford started recommending 5w30 for the turbocharged 3.5 Ecoboost engines, but they haven’t changed the recommendation for the non-turbo duratec. You can run both 5w20 or 5w30 safely on these engines (turbocharged and non-turbo). Both oils will work great.
What is the best oil to use in a Ford?
Motorcraft®
Ford recommends using Motorcraft®* motor oil for your Ford vehicle. Using the right oil helps keep your vehicle’s engine clean, reduces overall wear, and maximizes performance.
Does Ford use full synthetic oil?
Every Ford model has the required oil specification listed in the owner’s manual. High performance cars like the Mustang as well as turbocharged engines across the Ford lineup typically require synthetic engine oil. If your car doesn’t require synthetic oil, the choice is yours to make.
What is the best oil for a 2012 Ford Flex?
STP Conventional Engine Oil 5W-30 5 Quart
5W-30.
What type of oil does a 2010 Ford Flex take?
Notes: Full synthetic. 5W-20. 5 quart.
What brand engine oil is best for Ford?
Motorcraft®
Ford recommends using Motorcraft®* motor oil for your Ford vehicle.
How often do you change the oil in a Ford Flex?
A Ford manual will suggest changing the oil every 7,500 miles…
