Type of Oil for Dodge Nitro
The recommended type of oil for a Dodge Nitro varies slightly depending on the model year and engine type. However, based on the information provided, SAE 5W-20 synthetic motor oil is generally recommended for the Dodge Nitro. This is the optimal oil type for the vehicle, and it is readily available at most auto supply shops and gas stations .
In addition, it’s important to note that if SAE 5W-20 oil is not available, a semi-synthetic 10W-40 oil can be used as a substitute, although the Nitro is designed to operate at its best with the former.
The oil capacity for a Dodge Nitro varies depending on the engine size and model year. For example, a 2009 Dodge Nitro with a V6 engine has a motor oil capacity of 4.7 liters.
It’s recommended to adhere to the regular oil change interval, which is typically once every 5,000 to 6,000 miles or every 7 to 8 months, whichever comes first. Regular oil changes are essential for keeping the Dodge Nitro engine running smoothly.
When performing an oil change, it’s important to use the appropriate engine oil viscosity and volume, along with a new oil filter and the necessary tools.
Contents
- What type of oil does a 2011 Dodge Nitro take?
- What oil does a 2011 Dodge Nitro 4.0 take?
- Does Dodge use full synthetic oil?
- What brand of oil does Dodge recommend?
- What kind of oil does a 2010 Dodge Nitro take?
- What oil does a 4.0 take?
- What type of gas does a Dodge Nitro take?
- How much oil does a 2006 Dodge Nitro 3.7 take?
- What oil goes in a 2011 Dodge Nitro?
- Can you use regular oil instead of full synthetic?
What type of oil does a 2011 Dodge Nitro take?
Notes: Full synthetic. 5W-20.
What oil does a 2011 Dodge Nitro 4.0 take?
Oil Grade: SEO11
Viscosity: | All TEMPS….10W-30 |
---|---|
Capacity: | With filter 5.5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |
Does Dodge use full synthetic oil?
Again, there’s no manufacturer we’re aware of that makes this recommendation. Chrysler, Jeep, Dodge, Ram, Mercedes-Benz, Porsche, Corvette, Volkswagen, Hyundai and many other manufacturers’ vehicles come from the factory with synthetic oil. Myth: Using a synthetic oil voids a car’s warranty.
What brand of oil does Dodge recommend?
Dodge and Pennzoil®
Pennzoil and Dodge have a relationship rooted in passion and trust. Dodge has a fleet of vehicles that clearly demonstrate its drive for providing the highest quality drive possible. From the Dart to the Durango, a Pennzoil formulation comes factory filled.
What kind of oil does a 2010 Dodge Nitro take?
The 2010 Dodge Nitro uses the 5W-20 synthetic motor oil. It is always a good idea to use the manufacturer’s recommended oil type. This helps Your engine perform at its optimal levels and extends it lifespan.
What oil does a 4.0 take?
Yep, I run 10W-30. I’d only run 5W-30 in the Winter months if you lived somewhere where it got really, really cold! But other than that, any brand works. These 4.0 engines are not high performance engines that require synthetic or anything fancy.
What type of gas does a Dodge Nitro take?
Regular Gasoline
Compare Side-by-Side
Vehicle Specification Data | |
---|---|
Supercharger | No |
Passenger Volume | |
Luggage Volume | |
Fuel Type | Regular Gasoline |
How much oil does a 2006 Dodge Nitro 3.7 take?
5.0 qt.
Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
What oil goes in a 2011 Dodge Nitro?
5W-20
Notes: Full synthetic. 5W-20.
Can you use regular oil instead of full synthetic?
Synthetic oils typically provide better protection than conventional oils, but switching back and forth between full synthetic and conventional oil will not damage the engine. Of course, this depends on the current engine condition and the quality of the conventional oil being used.