Type of Oil for Dodge Nitro
The Dodge Nitro takes 5W-20 motor oil. This type of motor oil is recommended for the Dodge Nitro and is readily available at most auto supply shops and gas stations. It’s important to note that if 5W-20 oil is not available, a substitute of semi-synthetic 10W-40 can be used, but the Nitro is built to operate at its best with 5W-20.
Additionally, for the 2011 Dodge Nitro, SAE 5W-20 synthetic motor oil is recommended.
Oil Capacity for Dodge Nitro
The oil capacity for a Dodge Nitro can vary based on the engine. For example, a 2009 Dodge Nitro with a V6 engine has a motor oil capacity of 4.7 liters, while the upgraded 4.0L engine has a capacity of 5.7 US quarts including the filter. It’s important to ensure the correct amount of oil is used based on the specific engine type.
Oil Change Intervals
The oil in a Dodge Nitro will need to be changed out every 7,500 miles, and the vehicles come with an oil life indicator to signal when it’s time for a change. The recommended change interval is once every 5,000 to 6,000 miles or every 7 to 8 months, whichever comes first.
It’s essential to follow the manufacturer’s recommendations for oil change intervals to ensure the engine runs smoothly and efficiently.
If you have any further questions or need assistance with anything else, feel free to ask!
Contents
- How much oil does a 3.7 Dodge Nitro take?
- Can I use 5W-30 instead of 5W 20?
- Does Dodge use synthetic oil?
- What kind of oil does a Dodge Nitro 3.7 take?
- Why is my Dodge Nitro leaking oil?
- What kind of oil does a Dodge Nitro 2.8 CRD take?
- How much oil does a 4.0 Dodge Nitro take?
- What brand of oil does Dodge recommend?
- What oil does a 2011 Dodge Nitro 4.0 take?
- How much oil does a 2006 Dodge Nitro 3.7 take?
How much oil does a 3.7 Dodge Nitro take?
5 quarts
Capacity: With filter 5 quarts. After refill check oil level.
Can I use 5W-30 instead of 5W 20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
Does Dodge use synthetic oil?
Again, there’s no manufacturer we’re aware of that makes this recommendation. Chrysler, Jeep, Dodge, Ram, Mercedes-Benz, Porsche, Corvette, Volkswagen, Hyundai and many other manufacturers’ vehicles come from the factory with synthetic oil. Myth: Using a synthetic oil voids a car’s warranty.
What kind of oil does a Dodge Nitro 3.7 take?
Mobil 1 – Extended Performance High Mileage Full Synthetic Motor Oil 5W-20, 5 Quart (Part No. 15020)
Why is my Dodge Nitro leaking oil?
The most common reasons a Dodge Nitro is leaking oil are oil system component failure and leaking engine gaskets.
What kind of oil does a Dodge Nitro 2.8 CRD take?
Engine oil CASTROL EDGE, LL 5W-30, 5l.
How much oil does a 4.0 Dodge Nitro take?
Oil Grade: SEO11
| Viscosity: | 10W-30 (All TEMPS) |
|---|---|
| Capacity: | 5.5 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What brand of oil does Dodge recommend?
Dodge and Pennzoil®
Pennzoil and Dodge have a relationship rooted in passion and trust. Dodge has a fleet of vehicles that clearly demonstrate its drive for providing the highest quality drive possible. From the Dart to the Durango, a Pennzoil formulation comes factory filled.
What oil does a 2011 Dodge Nitro 4.0 take?
Notes: Full synthetic. 5W-20. 5 quart.
How much oil does a 2006 Dodge Nitro 3.7 take?
5.0 qt.
Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
