AHG Auto Service » Make » Dodge » What type of oil does a Dodge Challenger v6 take?

What type of oil does a Dodge Challenger v6 take?

Based on the search results, the Dodge Challenger V6 engine typically requires SAE 5W-20 oil. The oil type recommended for the 2016 Dodge Challenger V6 is full synthetic [[9]]. It is important to note that the oil capacity may vary depending on the specific model year and engine size. For the 3.6L V6 engine, the oil capacity is approximately 5.9 quarts . It is always recommended to consult the owner’s manual or contact a certified Dodge dealership for the most accurate and up-to-date information regarding oil specifications for your specific vehicle.

What oil is best for Dodge Challenger?

5W-20, Pennzoil SAE 5W-20, and Pennzoil gold 5W-20 semi-synthetic oil. Refer to your engine oil filler cap for correct SAE grade.

What oil does a Dodge 3.6 V6 take?

AMSOIL OE 5W-20 100% Synthetic Motor Oil.

Does a V6 Challenger need premium gas?

The Challenger Scat Pack, SRT Hellcat, SRT Hellcat Redeye, and SRT Super Stock will require premium 91-octane gasoline or higher. EPA estimated 19 city / 30 hwy MPG with 3.6-liter V-6 engine and eight-speed automatic transmission, RWD. Actual mileage may vary. EPA estimates.

Can I use 5W 30 instead of 5W20 in my Dodge?

As long as the manual says 5w-30 is ok to use, is a suitable alternative if 5w-20 not available, the engine is ok. That makes sense. I’ll ask just out of curiosity, but the manual says it’s an acceptable alternative.

How much oil does a Dodge 3.6 V6 take?

The 3.6L Pentastar Upgrade engine typically uses a smaller oil pan for most applications versus the 3.6L Pentastar Classic, resulting in an engine oil capacity of five (5) quarts for the Upgrade engine.

What kind of oil does a Dodge Charger V6 take?

5W-20
6 liters 5W-20 Dodge Charger engine oil, oil filter, and hardware for 3.6L V6 applications. Advanced RAVENOL USVO fully synthetic oil technology meets or exceeds recommended MS-6395 motor oil quality spec. Fits 2014-2021 Dodge Charger 3.6L V6.

What kind of oil does a V6 Challenger take?

5W-20Oil Grade: SEO11

Viscosity: All TEMPS….5W-20
Capacity: With filter 5.9 quarts. After refill check oil level.
Torque: Oil Drain Plug…20 ft/lbs

Does Dodge use full synthetic oil?

Again, there’s no manufacturer we’re aware of that makes this recommendation. Chrysler, Jeep, Dodge, Ram, Mercedes-Benz, Porsche, Corvette, Volkswagen, Hyundai and many other manufacturers’ vehicles come from the factory with synthetic oil. Myth: Using a synthetic oil voids a car’s warranty.

How much oil does a V6 Challenger take?

6 Qts
Dodge Charger Challenger 3.6L 6 Qts.

Is 5W 20 oil good?

Recommending lighter-viscosity oil, such as 5W-20, helps protect modern engines with tighter tolerances while promoting improved fuel economy. Some automakers are even recommending 0W-16 to achieve even better fuel-economy gains.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment