What type of automatic transmission fluid does Ford use?

Ford uses different types of automatic transmission fluid (ATF) depending on the specific vehicle and transmission. The recommended ATF for Ford vehicles can be found in the Owner’s Manual or on Ford’s Chemicals and Lubricants website. You can search for the Capacities and Specifications section of your Owner’s Manual or access the FCSD Chemicals and Lubricants Quick Reference Charts on the website. These charts provide information on the appropriate transmission fluid for your vehicle based on the model year and transmission type.
Additionally, Motorcraft ATF Type F is recommended by Ford for older Ford automatic transmissions manufactured during the 1970s and earlier. It is also suitable for power steering systems in a wide variety of Ford vehicles built prior to Model Years 1996-1998.
It’s important to note that Ford has a franchise system where dealers can set their own prices for parts, including transmission fluid. Therefore, there may be variability in pricing between dealers.
For more detailed information and to ensure you are using the correct ATF for your specific Ford vehicle, it is recommended to consult the Owner’s Manual or contact a Ford dealership.

Are Mercon LV and Dexron VI the same?

Valvoline Dexron VI/Mercon LV ATF is the full-synthetic automatic transmission fluid that has been uniquely engineered to meet and exceed the requirements of the General Motors Dexron VI specification and is officially licensed and approved by GM.

Can you mix Mercon V and LV?

It is recommended that the two should not be mixed. Short answer: NO!!! Long answer: The LV stands for “low viscosity.” It is a fully synthetic ATF. It is not compatible with earlier Mercon fluids, so it should neither be mixed with Mercon or Mercon V used to replace those fluids.

What does Ford recommend for transmission fluid change?

around 150k miles
When Should an Automatic Transmission Fluid Change Be Performed? The best time to have your automatic transmission serviced is when the maintenance schedule says it’s due. For many Ford vehicles under normal use, the service interval is around 150k miles.

Can you use Dexron 3 transmission fluid in a Ford?

LUBRIPLATE Dexron III/Mercon is a premium fluid fully qualified to cover current requirements for both General Motors and Ford.

What type of ATF does Ford use?

Mercon LV 55 Gallon Drum. Automatic Transmission. Fluid.

Is Type F transmission fluid for Ford?

FORD TYPE F AUTOMATIC TRANSMISSION FLUID
Phillips 66® Type F ATF is specifically designed for use in automatic transmissions in passenger cars and light trucks manufactured by Ford Motor Company prior to 1977, and in many 1977-1981 models.

Are Dexron and Mercon compatible?

DEXRON® -III/MERCON® ATF is recommended for the following applications: All late model GM, American Motors, Chrysler and most imported car, light truck and van automatic transmissions, as well as, those in Ford vehicles that call for Mercon® fluid.

When did Ford switch to Mercon LV?

2005 – MERCON LV
In December 2005, Ford released the Mercon “LV” fluid specification (M2C938-A).

Does Ford use Dexron?

Dexron fluids are used by GM. Ford and Mazda designed their transmissions for Mercon. Other import brands like Honda (DW-1) and Toyota (ATF Type-T) have their own specific fluid too.

Is Mercon V and LV the same?

It is for all 2008 and newer Ford vehicles. Mercon V is not compatible with Mercon LV. I believe the LV is much thinner, if your car originally required V but the spec has been updated to LV I would stick with mercon V, as the thinner fluid could cause issues in transmissions made for thicker fluids.