What transmission fluid for chevy 4L60E?

Transmission Fluid for Chevy 4L60E
The recommended transmission fluid for the Chevy 4L60E is Dexron III (Dex/Merc) or Dexron VI (Dex6) [[9]].
– Dexron III (Dex/Merc) was the recommended transmission fluid for the 4L60E when it was released in 1993.
– Dexron VI (Dex6) was released by GM in 2005 and is designed for newer vehicles and transmissions. However, it is backward compatible with Dexron III transmission fluid.
When performing a fluid and filter change on the 4L60E, you will need about 5 or 6 quarts of new fluid.
Please note that it’s always a good idea to consult your vehicle’s owner’s manual or a certified mechanic for specific recommendations for your Chevy 4L60E transmission.
I hope this helps! Let me know if you have any other questions.

Can I use DEXRON 6 instead of 3?

DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.

What transmission fluid does Chevy recommend?

DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)

What is the best fluid to run in a 4L60E?

Dex VI will be a great choice, but the standard D/M fluids will work fine too. It’s really your choice. Mixing them won’t do any harm, though Dex VI may clean marginally better.

How many quarts of transmission fluid goes in a 4L60E?

11.2 quarts
Automatic transmissions: 4L60-E: 11.2 quarts.

What’s the difference between ATF and Dexron transmission fluid?

Dextron is a General Motors approved trans fluid (there are a few versions), and ATF is a generic name for trans fluid. Dextron can and is used in many other makes of vehicles (not just GM), and you need to make certain you are putting the correct fluid in whatever car you own so research whatever applies.

What transmission fluid does a 4L60E take Chevy?

USE THE RIGHT TRANSMISSION FLUID – GM Service Insights
These 4L60-Es and 4L80-Es originally called for Dexron III, so the ACDelco ATF Type III is an appropriate ATF.

Does Dexron 6 replace Dexron 2?

Dexron VI replaced Dexron II and III, and can be used in General Motors domestically built or import transmissions that specified Dexron II or Dexron III. Dexron VI is a low viscosity transmission fluid and should also be used with the full synthetic low viscosity transmission fluid.

How many quarts of fluid does a 4L60E take?

A dry 4L60E with a new 12″ converter will hold between 12-13 quarts of fluid, on average. Certain things will change this figure. If you add an auxillary cooler, it will take more.

What is the difference between dexron 3 and dexron 6?

Assuming it’ll run fine on Dex III, keep in mind that the main difference between the two fluids is that the useful life of Dex III is half that of Dex VI. Actually, the biggest difference between Dex III and Dex VI is the viscosity. Dex VI is a much thinner ATF.

How many gallons of transmission fluid does a 4L60E take?

A 4L60E will take 4-6 quarts on a fluid and filter change. These figures depend on how much it has drained down, how long it’s been sitting, and the pan depth. Many people ask about the proper fill procedure for a freshly built trans. Some prefer to pre fill their torque converters.