What transmission fluid does a Subaru Outback take?

Transmission Fluid for Subaru Outback
The type of transmission fluid required for a Subaru Outback depends on the specific transmission type and model year. Here are the key points based on the search results:
1. Automatic Transmission Fluid (ATF): The Subaru Outback uses automatic transmission fluid. The specific type of ATF required may vary based on the model year and transmission type. It’s important to use the correct ATF for the vehicle.
2. CVT Transmission Fluid: For Subaru Outbacks with a Continuously Variable Transmission (CVT), the CVT fluid should be inspected regularly, typically every 30,000 miles, and eventually flushed and replaced. The specific type of CVT fluid required may vary based on the model year.
3. Maintenance Schedule: The maintenance schedule for transmission fluid inspection and replacement varies based on driving conditions and the specific model year. It’s recommended to consult the Subaru Owner’s Manual for guidance on the frequency of transmission fluid changes.
4. Fluid Change Cost: The cost of a Subaru Outback transmission fluid change averages between $189 and $210.
Based on the information provided, it’s essential to refer to the specific model year and transmission type of the Subaru Outback to determine the exact type of transmission fluid required. If you have a specific model year in mind, I can provide more detailed information based on that.

Does Subaru Outback use CVT transmission?

While both Subaru and Nissan offer vehicles with continuously variable transmissions (CVT), they do not use the same CVT transmissions. Subaru produces their own CVT transmissions which are specifically designed for their vehicles. These transmissions are produced in-house by Subaru and are called Lineartronic CVT.

Does it matter what transmission fluid I use?

The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.

What oil goes in a Subaru transmission?

Subaru Auto Transmission oil
One is the Dextron 3 mineral oil used in the 4AT. With the introduction of the 5AT Subaru went to the Transmax X which is premium automatic transmission fluid specifically designed for use in 5AT Subaru vehicles.

Can I use ATF instead of CVT fluid?

CVT fluid is specially formulated for the particular friction requirements of the steel band and pulleys. ATF is made for clutches. If you accidentally put ATF in a CVT, you will need to completely drain and flush the unit.

Is CVT oil same as ATF?

No, absolutely not – unless your “automatic” is a CVT, and then you must use CVT fluid. ATF and CVT oils are chemically completely different fluids with different additives, base stocks, viscosities, friction coefficients, etc.

What transmission fluid is compatible with Subaru?

AMSOIL offers a synthetic automatic transmission fluid recommended for SUBARU ATF and SUBARU ATF-HP applications. These automatic transmission fluids contain anti-wear/extreme-pressure agents to (extend gear life). They have durable friction modifiers to help prevent shudder during shifting.

What happens if you use ATF instead of CVT fluid?

Using the wrong type of transmission fluid for high-tech vehicles can result in irreversible damage. One should never mix regular manual or automatic transmission fluid with CVT fluid or vice versa. While an advanced car can run with the wrong transmission fluid, it will end in damage.

What transmission fluid does a Subaru Outback use?

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)

Does a CVT need special fluid?

The transmission fluid ensures the belt or chain remains in contact with the pulleys, which is why CVTs require specialized fluids rather than traditional automatic or manual transmission fluid. CVT fluids are formulated with the correct frictional requirements to guard against belt slipping.

What type of transmission fluid does a Subaru CVT take?

Idemitsu CVTF Type SB2 is specifically formulated to meet and/or exceed the latest performance and protection requirements of continuously variable transmissions in Subaru vehicles.