What transmission fluid does a Dodge Avenger take?

Dodge Avenger Transmission Fluid
The Dodge Avenger uses ATF+4 Automatic Transmission Fluid for its transmission. This type of fluid is recommended for use in the Dodge Avenger’s automatic transmission system.
When it comes to your Dodge Avenger, it’s important to use parts and products from trusted brands. Advance Auto Parts offers ATF+4 Automatic Transmission Fluid for the Dodge Avenger, starting from as little as $10.99.
It’s crucial to ensure that the transmission fluid is at the correct level and in good condition to maintain the proper functioning of the transmission system. Regular maintenance, including checking and changing the transmission fluid, is essential for the longevity of the vehicle.
If you’re considering a transmission fluid change, it’s advisable to consult a reputable transmission specialist to ensure that the process is carried out correctly and with the proper equipment. Regular maintenance of the transmission fluid, including changing the filter if equipped, should be done on a regular schedule to prevent potential issues such as transmission slipping.

Can I use any ATF transmission fluid?

The best ATF will depend on the year, make, and model of your vehicle and its type of transmission. It’s important to be sure you’re using the correct type because using the wrong one can damage the transmission.

How much transmission fluid does a Dodge Avenger take?

For Automatic Transmission: 62TE….AP4

Capacity:	6 speed 62TE Total Fill 9 quarts.
Capacity:	5.5 quarts Initial Fill.

Is 4 quarts of transmission fluid enough?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

What transmission fluid does a 2012 Dodge Avenger take?

Automatic Transmission Fluid
6 speed 62TE Total Fill 9 quarts.

What transmission fluid do I use in Dodge?

Eurol ATF 1100 and Ravenol ATF +4 transmission fluids meet or exceed the following Chrysler Dodge ATF +4 part numbers: 05010125AC, 05013458MA, 05010125AA, 04773591AC, 05093764AA, 04467722, 5013458AA, 68218054GA, 680474406MA, 68087385EA, 68218058GA, 05013458AA, 05103531EA, 05013458GA, 68218057GA, 05013457AA, 05103527EA, …

Do Dodge Avengers have transmission problems?

Transmission and Shifting Issues
While this issue was found in the 1995-2000 and 2008-2014 year models, it was a huge 2008 Dodge Avenger problem. Avenger owners would notice the problem at an average of 93,000 miles.

How many quarts of transmission fluid does a Dodge?

Best Answer
Suggest starting off with 4 quarts of ATF after you drop the pan and replace fluid and filter, then run engine to operating temp, shift slowly into each gear then back to park, then check fluid and top off.

How much transmission fluid does a 2012 Dodge Avenger take?

A 2012 Dodge Avenger transmission flush likewise uses about 10 quarts of fluid to entirely clean and flush out the system.

Does it matter what transmission fluid I use?

The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.

What type of transmission does a Dodge Avenger have?

Dodge Avenger sedan (2007–2014)

Dodge Avenger sedan
Transmission	4-speed Ultradrive 40TES automatic 4-speed Ultradrive41TES automatic 5-speed Magna T-355 manual 6-speed Ultradrive 62TE automatic 6-speed Getrag Mps6 DCT automatic 6-speed Aisin manual
Dimensions
Wheelbase	108.9 in (2,766 mm)
Length	190.9 in (4,849 mm)