Transmission Fluid for a 2009 Chevy Cobalt
The 2009 Chevy Cobalt requires Dexron VI full synthetic automatic transmission fluid for the automatic transmission. It is important to use the recommended fluid to ensure proper protection for the gears in the transmission. It is also recommended to check the transmission fluid level every time you change your oil.
For manual transmissions in the 2009 Chevy Cobalt, the recommended fluid is DEXRON VI ATF. It is important to note that manual transmissions in the Cobalt are not typically supposed to have transmission fluid changes, but with higher mileage, it may be necessary.
Please note that the information provided is based on the search results and may not cover all possible scenarios. It is always a good idea to consult the owner’s manual or a certified mechanic for specific information regarding your vehicle.
I hope this helps! Let me know if you have any other questions.
Contents
- What transmission fluid does Chevy recommend?
- Does a 2009 Chevy Cobalt have a transmission dipstick?
- What oil does a 2009 Chevy Cobalt take?
- What kind of transmission fluid does a Chevy Cobalt take?
- How many quarts does a 2009 Chevy Cobalt take?
- Does it matter what transmission fluid I use?
- How much transmission fluid goes in a Chevy Cobalt?
- How much transmission fluid does a 2009 Chevy Cobalt take?
- What transmission does a 2009 Chevy Cobalt have?
- What years to avoid Chevy Cobalt?
What transmission fluid does Chevy recommend?
DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)
Does a 2009 Chevy Cobalt have a transmission dipstick?
There is no dipstick on a cobalt. There is a black screw on cap on the top of the trans to the right of the motor. If you want to check your fluid level, raise the vehicle but make sure it is level from front to back.
What oil does a 2009 Chevy Cobalt take?
5W-30
Oil Grade: SEO23
Viscosity: | All TEMPS….5W-30 |
---|---|
Capacity: | With filter 5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…18 ft/lbs |
What kind of transmission fluid does a Chevy Cobalt take?
DEXRON®-VI
Castrol – Transmax ATF DEXRON®-VI Automatic Transmission Fluid 1 Quart (Part No. 15B1A0)
How many quarts does a 2009 Chevy Cobalt take?
5 quarts
Oil Grade: SEO23
Viscosity: | All TEMPS….5W-30 |
---|---|
Capacity: | With filter 5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…18 ft/lbs |
Does it matter what transmission fluid I use?
The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.
How much transmission fluid goes in a Chevy Cobalt?
12.9 quarts
Automatic Transmission Fluid
4 speed 4T45-E Total Fill 12.9 quarts.
How much transmission fluid does a 2009 Chevy Cobalt take?
For Automatic Transmission: 4T45-E….AF6
Capacity: | 4 speed 4T45-E Total Fill 12.9 quarts. |
---|---|
Capacity: | 7 quarts Initial Fill. |
What transmission does a 2009 Chevy Cobalt have?
Transmission, 5-speed manual (When ordered with (PG1) 15″ (38.1 cm) steel wheels, vehicle will get XFE badge.)
What years to avoid Chevy Cobalt?
To save you time, here’s a quick list of the worst Cobalt model years to avoid:
- 2005 Chevrolet Cobalt.
- 2006 Chevrolet Cobalt.
- 2007 Chevrolet Cobalt.
- 2008 Chevrolet Cobalt.