What transmission does the 6.2 Chevy have?

The 6.2 Chevy has been paired with various transmissions over the years, including the TH700r4, 6L80, 6L90, and 8-speed Hydra-Matic automatic transmission. The 6.2 Chevy has also been equipped with the 6-speed automatic transmission and the NV5600 six-speed manual transmission. The specific transmission used can depend on the model year and the specific vehicle configuration. For example, the 2015 Chevrolet Silverado and GMC Sierra pickups, as well as GMC Yukon Denali and Yukon XL Denali models, come standard with an 8-speed Hydra-Matic automatic transmission to replace the current 6-speed for 2015. Additionally, the 6.2 Chevy has been paired with the 6L90 transmission, which shares about 75 percent of its parts with the 6L80 and has a slightly longer case. The 6.2 Chevy has also been equipped with the NV5600 six-speed manual transmission in certain configurations.

Is the Chevy 6.2 an LS?

As the standard engine in the fifth-generation Camaro SS and C6 Corvette, the high-revving, deep-breathing LS3 6.2L is poised to go down in history as one of Chevrolet’s best and most versatile engines.

What transmission does a 2018 6.2 Silverado have?

TRANSMISSION & AXLE

Type:	Hydra-Matic 6L80 six-speed automatic (4.3L and 5.3L) Hydra-Matic 8L90 eight-speed automatic (5.3L and 6.2L)
Final Drive Ratio:	3.08, 3.23 or 3.42; 3.73 with 5.3L with six-speed and Max. Trailering Pkg.

Why does Chevy 6.2 require premium?

However, if you upgrade the engine to the 6.2L, you might be wondering, “Does the Chevy 6.2 need premium gas”? Yes, the Chevy 6.2L engine has a higher compression ratio, and 93-octane gas is recommended.

When did the 6L80 come out?

2006
The 6L80 was, from the ground up, developed as an electric over hydraulic transmission with microprocessor control. The 6L80 began manufacture in 2005 for release in 2006 model year GM vehicles, persisting until at least 2016 in both 6L80 and 6L90 versions.

Is the GM 6L80 a good transmission?

The 6L80 and 6L90 transmissions were powerful in their heydays and were released in several vehicles. However, they are prone to damage usually caused by the failure of the torque converter. This has resulted in a consistent pattern of transmission failures across the country, as evidenced by tech specialists.

Is 6.2L V8 a good engine?

Proper use and maintenance will help keep the engine as reliable as possible. Many owners have had zero issues with their Ford 6.2 engine even after hundreds of thousands of miles. On the flip side, some have had problems quite early on even before factors like maintenance would affect reliability.

What is the best transmission for the LS engine?

Why 4L60E Is the Best for Your Swap Project. For a few reasons, the 4L60E is one of the most common transmissions for LS swap. It is known to be a strong and reliable transmission. It is also what originated to be the original automatic transmission giving backing to the majority of LS engines.

What is the specs of the 6.2 Silverado?

6.2-liter EcoTec3 V8
A stronger version of the 5.3-liter V8, the 6.2-liter engine puts out 420 horsepower and 460 pound-feet of torque. Make short work of tall tasks at the dig site and ensure you have total control of your drive. The lineup’s strongest engine manages a maximum towing capacity of 13,400 pounds.

Which transmission does the 6.2 L V8 engine use?

Fuel-saving six-speed automatic transmission
Silverado’s new Hydra-Matic 6L80 six-speed automatic transmission rolls out on models equipped with 5.3L, 6.0L and 6.2L engines. The six-speed helps achieve better fuel efficiency on the highway through lower “cruising” rpm – less fuel is used with the lower engine speed.

What is the weakness of the 6L80?

What Are Some of the Common Issues with 6L80 Transmission?

• Cracks in the 1-2-3-4 pistons.
• Slipping 2nd and 3rd gears.
• Cracked drum.
• Skipping 2-3 gears.
• Clutch Failure.
• First Gear Slipping.
• Reverse gear engagement failure.
• Cracked clutch drum.