What tools do you need to change oil for 2013 Chevy Equinox?

Tools Needed to Change Oil for a 2013 Chevy Equinox
To change the oil for a 2013 Chevy Equinox, you will need the following tools:
1. Oil filter wrench: A cap-style or strap-style oil filter wrench can be used to remove the old oil filter.
2. Socket wrench: A 1/4 inch socket wrench may be needed to remove the drain plug.
3. Oil drain pan: A pan or container to catch the old oil when draining it from the engine.
4. Funnel: A funnel can be used to pour the new oil into the engine without spilling.
5. Jack and jack stands or ramps: These are needed to lift the front of the vehicle to access the oil drain plug and oil filter.
6. New oil filter: Make sure to have a new oil filter on hand for replacement.
7. New engine oil: The 2013 Chevy Equinox requires 6 quarts of new oil, but it’s important to verify the specific requirements for your vehicle’s engine size in the owner’s manual.
Please note that the specific tools required may vary depending on personal preference and the specific engine size of your 2013 Chevy Equinox. It’s always a good idea to consult the owner’s manual for your vehicle to ensure you have the correct tools and follow the recommended procedures for changing the oil.
I hope this helps! Let me know if you have any other questions.

What size wrench is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size bolt is on the oil pan of a Chevy Equinox?

Head size (SAE/metric): 15 mm. With hex head. Thread size: M12-1.75.

What size socket do you need for oil pan?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.

What size oil filter wrench do I need?

This can be done by reading your car owner’s manual that specifies the oil filter diameter. Alternatively, you can also look up online for the oil filter diameter by entering the details of your car like model name/number/brand, etc.

How many quarts of oil does it take to fill up a 2013 Chevy Equinox?

5 quarts
Capacity: With filter 5 quarts. After refill check oil level.

What size socket do I need to change my oil?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size socket do I need for the oil pan bolt?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What tools will I need to change my oil?

Which Tools Do I Need to Change My Oil?

• Ratchet and Socket Set.
• Wrenches.
• Screwdriver Set.
• Maintenance Ramps.
• Hydraulic Floor Jack and Jack Stands.
• Safety Glasses.
• A Set of Rags for Cleanup.

What size is the oil drain plug on a 2013 Chevy Equinox?

Dorman Engine Oil Drain Plug 090-175.1
Program: oil-tite. 15 mm head. Shank length: 1″. Head size (SAE/metric): 15 mm.

What size socket is the oil filter on a 2015 Chevy Equinox?

32mm Socket
32mm Socket for Ecotec,TDI,VW,Audi,BMW,Polaris,GM,Volkswagen,Pontiac Chevrolet,Saturn,Pontiac,Saab,Chevy, Oil Filter Socket for Oil Change.