What tools do I need to change the oil in a 2013 Chevy Equinox?

Tools Needed to Change the Oil in a 2013 Chevy Equinox
To change the oil in a 2013 Chevy Equinox, you will need the following tools and materials:
1. 6 Quarts of New Oil: The vehicle requires 6 quarts of new oil. It’s important to use dexos 5W-30 oil, which is dexos approved for use in Chevrolet vehicles.
2. Oil Filter: The Chevy Equinox uses a cartridge type filter. You will need to replace the oil filter during the oil change. AC Delco and other reputable brands offer compatible oil filters for the Equinox.
3. Fomoto Quick Release Drain Valve (Optional): This can be used to replace the stock drain plug and make oil changes simpler with fewer tools.
4. Oil Filter Wrench: Depending on the specific engine and filter type, you may need an offset cap style oil filter wrench or a strap style oil filter wrench to remove and replace the oil filter.
5. 1/4 inch Socket: This tool may be needed for certain steps during the oil change process.
6. Jack and Jack Stands or Ramps: These are necessary for lifting the front of the vehicle to access the oil drain plug and filter.
7. Funnel: A funnel will be needed for pouring in the fresh oil.
8. Dipstick: This will be used to check the oil level after the oil change is complete.
9. Safety Glasses: It’s recommended to wear safety glasses when working under the vehicle.
10. Old Belt (Optional): This can be wrapped around the oil filter to aid in its removal by hand.
Remember to always consult the owner’s manual for specific instructions and safety precautions before performing an oil change on your vehicle.
If you have any further questions or need additional assistance, feel free to ask!

What size is the oil change bolt on a Chevy Equinox?

Accufit – Oil Drain Plug, M12 x 1.75 (Part No. ODP-00009B)

What size wrench do I need to remove an oil filter?

Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.

What size is the oil drain plug on a 2013 Chevy Equinox?

Dorman Engine Oil Drain Plug 090-175.1
Program: oil-tite. 15 mm head. Shank length: 1″. Head size (SAE/metric): 15 mm.

What tools will I need to change my oil?

Which Tools Do I Need to Change My Oil?

• Ratchet and Socket Set.
• Wrenches.
• Screwdriver Set.
• Maintenance Ramps.
• Hydraulic Floor Jack and Jack Stands.
• Safety Glasses.
• A Set of Rags for Cleanup.

What size socket is the oil filter on a 2015 Chevy Equinox?

32mm Socket
32mm Socket for Ecotec,TDI,VW,Audi,BMW,Polaris,GM,Volkswagen,Pontiac Chevrolet,Saturn,Pontiac,Saab,Chevy, Oil Filter Socket for Oil Change.

What size socket do I need to change my oil?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size wrench is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size oil filter wrench do I need?

This can be done by reading your car owner’s manual that specifies the oil filter diameter. Alternatively, you can also look up online for the oil filter diameter by entering the details of your car like model name/number/brand, etc.

How do you drain the oil out of a Chevy Equinox?

And then the oil drain plug. Right there we’re gonna get our pan ready right underneath it we’re gonna take our breaker bar in the 15 millimeter socket we’re just gonna bust this thing loose.

What size is the oil drain plug on a Chevy Equinox?

Accufit – Oil Drain Plug, M12 x 1.75 (Part No. ODP-00009B)