What tools do I need to change oil in Toyota Camry?

Tools Needed for Changing Oil in Toyota Camry
To change the oil in a Toyota Camry, you will need the following tools and parts:
1. Oil Filter With O-Rings: Toyota part number 04152-YZZA1 or equivalent.
2. 12mm Drain Plug Washer: Toyota part number 90430-12031 or equivalent.
3. Engine Oil: 4.6 quarts of 0W-20.
4. Oil Filter Wrench or Similar Tool: To remove the oil filter.
5. Ramp or Jack Stands: If you plan to elevate the car for easier access to the drain plug and oil filter.
6. Funnel: For adding new oil into the engine.
7. Oil Collection Pan: To collect the old oil when draining it from the car.
8. Rags: For cleaning up any spills or messes during the oil change process.
It’s important to ensure that you have all the necessary tools and parts before starting the oil change process to avoid any interruptions or delays.
If you’re using synthetic oil, it’s recommended to change it every year or every 10,000 miles, while for conventional oil, it’s advised to change it every six months or every 5,000 miles, whichever comes first .
Remember to consult the specific maintenance guidelines for your Toyota Camry model and year, as the location of the oil filter and other details may vary.
If you have any further questions or need additional assistance, feel free to ask!

Do you need tools to change oil filter?

Gather the tools: To change your oil filter, you’ll need a new oil filter, a wrench, a drain pan, and clean rags or paper towels.

How much oil does a Camry oil change take?

The standard oil capacity for the 2.5L engine Toyota Camry is 4.5 quarts, and the capacity for the v6 model is 5.7 quarts.

What size is the oil filter wrench on a 2013 Toyota Camry?

64.5mm

	Oil Filter Wrench for Toyota Lexus
Contents	Oil filter wrench x 1
Oil Filter Wrench Sizes	64.5mm (14fluts, 4 slots)
Torquing Way	3/8-inch drive ratchet (or 27mm socket)
Applications	Toyota (Camry, RAV4, Tacoma, Highlander, Sienna, Tundra), Lexus, Scion

What size oil filter wrench do I need?

This can be done by reading your car owner’s manual that specifies the oil filter diameter. Alternatively, you can also look up online for the oil filter diameter by entering the details of your car like model name/number/brand, etc.

How long can a Toyota Camry go without an oil change?

Toyota suggests a Toyota Camry oil change frequency of approximately every six months, but that figure may vary depending on your driving habits and other factors.

How do I know my socket size?

Here are the steps to determine the right socket size:

1. Imperial System: Use a Digital Caliper: Turn on a digital caliper and set it to read in inches. Convert to Fraction.
2. Metric System: Use a Digital Caliper: Turn on a digital caliper and set it to read in millimeters. Measure the Nut. Select the Socket Size.

What do you need for an oil change Toyota Camry?

What you need to conduct an oil change on your Camry

1. 4-6 quarts of suggested full synthetic oil (depending on your engine size)
2. A Genuine Toyota Parts Camry oil filter.
3. Oil-filter removal wrench.
4. Drain pan for the old oil.
5. Gloves.
6. Wrench for drain plug removal.
7. Funnel.
8. Drain plug washer.

What tools do I need for an oil change?

Which Tools Do I Need to Change My Oil?

• Ratchet and Socket Set.
• Wrenches.
• Screwdriver Set.
• Maintenance Ramps.
• Hydraulic Floor Jack and Jack Stands.
• Safety Glasses.
• A Set of Rags for Cleanup.

What size socket do I need to change my oil?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size is the oil drain plug on a Toyota?

It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.