What tools do I need to change brake pads Ford Focus?

Tools Needed to Change Brake Pads on Ford Focus
To change the brake pads on a Ford Focus, you will need the following tools:
1. Metric Bolts: The caliper is held on by 2 metric bolts, and the caliper housing is held on by a 15mm bolt. You might also need a 17mm to hold the caliper pins from spinning.
2. Flat Head Screwdriver or Brake Spoon: This is used to remove the outer pad retaining clip. The clip has a lot of spring energy, so it’s important to hold onto it with a pair of pliers when removing it to prevent injury.
3. Disposable Mechanic’s Gloves: These are used to protect your hands and keep them clean during the process.
4. Jack and Jack Stands: These are essential for safely lifting and supporting the vehicle while working on the brakes.
5. Brake Caliper Spreader: This is a purpose-built tool that fits between the closed caliper and has a mechanism to expand the gap, making it easier to install the new pads.
6. Brake Caliper Wind Back Tool: This tool is used to press in the brake caliper piston.
7. Torque Wrench: This is useful for tightening bolts to the manufacturer’s specifications.
8. Wire Brush and Brake Cleaner: These are used to clean the brake caliper bracket, brake caliper guide pins, and boots. It’s important to replace them if necessary.
9. Safety Goggles: Caution should be exercised when working with brake and suspension components, and proper safety goggles should be worn at all times.
10. Other Useful Tools: A hammer, Allen/Hex key, pliers, adult beverages (optional), and other basic hand tools may also be helpful during the process.
Remember to always refer to the specific model and year of the Ford Focus being worked on for any model-specific requirements or differences in the brake system.

Do I need to bleed brakes after changing pads?

Do You Need to Bleed Brakes After Changing Pads? Yes, you will need to bleed your car’s brakes after changing its brake pads. This helps to remove any dirt in the braking system. It’s common for people to open both the bleeder valve and squeeze calipers while changing the brake pads.

How much does it cost to change brake pads on a Ford Focus?

between $187 and $215
The average cost for a Ford Focus Brake Pad Replacement is between $187 and $215. Labor costs are estimated between $102 and $129 while parts are priced between $84 and $86.

Do I need to bleed brakes when changing pads?

Do You Need to Bleed Brakes After Changing Pads? Yes, you will need to bleed your car’s brakes after changing its brake pads. This helps to remove any dirt in the braking system. It’s common for people to open both the bleeder valve and squeeze calipers while changing the brake pads.

What size socket do I need to remove a brake caliper?

What size wrench do i need to take the front calipers off to replace my brake pads? Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.

Is it cheaper to change your own brake pads?

Everybody who owns a car or truck should learn how to replace their brake pads and rotors. The markup at a service center—especially a car dealership—can be exorbitant. But, a brake job can be accomplished quickly and easily, with just a handful of cheap tools, for less than half the cost.

What tools do I need to change brake pads on a Ford Focus?

Related: Brakes

• Essential Tools for Changing Brake Pads.
• Safety Glasses.
• Dust Mask.
• Wrenches.
• Allen Wrenches, Hex Keys, Torx and Allen Sockets.
• Ratchet and Socket Set.
• Screwdriver Set.
• Jack and Jack Stands.

Do you have to take caliper off to change pads?

If you have “fixed” calipers, with pistons on either side of the rotor, you’ll likely have to take off the entire caliper to reach the pads, unless there’s an access point on the back of the calipers. If you don’t have a piston compressor tool, now’s the time to compress the piston(s) by hand.

Can I change my brake pads myself?

Over time, brake pads wear out and eventually need replacing. Fortunately, you can often get the job done yourself with the right tools and materials. This guide on how to change brake pads will walk you through the process.

Can a beginner change brakes?

For someone with little to no experience, brake pad replacement could take several hours or more. Learning the process, gathering the right tools, precisely following all the steps, and then putting everything back together again can easily turn into a half-day of work that, ultimately, may not be worth your time.

What tool do you need to change a brake pad?

As far as tools, you’ll want to round up a jack and jack stands, a lug wrench, C-clamp or caliper spreader tool, and a basic tool set. Many calipers require a Torx or Allen bit to remove the caliper bolts, so check to make sure that you have the correct tool before beginning the job.