What tools do I need for an oil change on a Dodge Challenger 2017?

Tools Needed for an Oil Change on a Dodge Challenger 2017
To perform an oil change on a Dodge Challenger 2017, you will need the following tools:
1. Rags: These are used to clean up any spills or drips during the oil change process.
2. Safety glasses: It is important to protect your eyes from any potential hazards while working on your vehicle.
3. Wrench set: A wrench set is necessary to remove the oil drain plug and the oil filter.
4. Container for used oil: You will need a container to collect and store the used oil for proper disposal.
5. Engine oil: The 2017 Dodge Challenger with a 3.6L engine requires SAE 5W-20 oil with a capacity of 5.9 quarts.
6. Oil filter: You will need to replace the oil filter during the oil change. The specific oil filter for your Dodge Challenger can be found in the owner’s manual or by consulting an auto parts store.
It is important to note that performing an oil change requires some automotive knowledge. If you are not comfortable or familiar with the process, it is recommended to schedule service with a professional who can also inspect the rest of your car.
Remember to always consult your vehicle’s owner’s manual for specific instructions and recommendations for your Dodge Challenger 2017.

How much is an oil change for a 2017 Dodge Challenger?

$89 – $106
Parts usually come with a manufacturer’s warranty – ask the dealer about this as details may vary.

Is it expensive to maintain a challenger?

Each service varies in cost depending on your Challenger’s model as well as the place of repair. Overall, the costs can accumulate to over $8,000 to $10,500 or more for 10 years. Stick around to learn more about Dodge Challenger maintenance costs.

How do you change the oil on a 2017 Challenger?

And drive those out. And now with those four nuts removed. You just lay on the shaker there and it just lifts straight up i’m gonna need two hands. Here. There we go.

What tools will I need to change my oil?

Which Tools Do I Need to Change My Oil?

• Ratchet and Socket Set.
• Wrenches.
• Screwdriver Set.
• Maintenance Ramps.
• Hydraulic Floor Jack and Jack Stands.
• Safety Glasses.
• A Set of Rags for Cleanup.

How long can a Dodge Challenger go without an oil change?

Dodge recommends getting your 2022 Dodge Challenger oil & filter changed each 3,000-5,000 miles for conventional oil. Synthetic oil ordinarily should be changed each 7,500 – 10,000 miles.

What size socket do I need for oil plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

How long can a challenger go without oil change?

Every 6 Months: Change the oil. The old “every 3,000 miles” rule in terms of changing oil is out the window with newer car models. The Challenger’s oil should be changed every 6 months, or every 8,000 miles – whichever comes first.

What size oil drain plug do I need?

Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.

What size is the oil drain plug on a Dodge Challenger?

^^ Correct, it’s 13mm. You’ll also need a 10mm to remove the splash shield.

What size socket do I need to change my oil?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.