To change spark plugs in a Subaru, you will need the following tools [[3]] :
– Appropriately sized spark plug socket
– 8-10mm sockets
– Ratchet and extensions
– 10mm wrench
– Floor jack and a piece of wood (optional)
These tools will allow you to remove the old spark plugs and install new ones. It’s important to use the right tools to ensure a proper and efficient replacement process.
Contents
- What size socket do I need to remove spark plugs?
- What size socket is a Subaru?
- What size socket for spark plugs on a 2006 Subaru Forester?
- Is it OK to change spark plugs yourself?
- How do you change spark plugs on a Subaru?
- What tool do I need to change spark plugs?
- What size socket for Subaru spark plugs?
- What is the best tool to remove spark plugs?
- What is the spark plug gap on a 2006 Subaru Forester?
- Where are the spark plugs in a 2006 Subaru Forester?
What size socket do I need to remove spark plugs?
What size socket do I need to change out spark plugs? For the majority of plugs, you need a 5/8” or 16mm socket. Some Fords use 9/16″ plugs, some newer European and Asian vehicles use 14mm plugs, and there are a few applications that use 7/8″, 13/16″, ¾” or 18mm plugs.
What size socket is a Subaru?
To remove and install Subaru lug nuts, you’ll need a 19mm socket. This fits the standard 12mm x 1.25 nuts. So the common socket sizes are: 12×1.25mm lug nuts: 19mm socket.
What size socket for spark plugs on a 2006 Subaru Forester?
Side get that vacuum line out of the way. And the ignition coils just pull right out. Well it might take a bit of finagling anyways.
Is it OK to change spark plugs yourself?
If you’re not comfortable with that, take your vehicle to a pro. But if your engine affords easy access to the rear bank, you can probably do the job yourself. Just be sure you gap the spark plugs properly and use a torque wrench. The tools shown are available at online suppliers and auto parts stores.
How do you change spark plugs on a Subaru?
For Subarus with ignition coils, carefully remove the retaining bolts or screws securing the coils in place and disconnect the electrical connectors. Using a ratchet or spark plug socket, loosen and remove the old spark plugs from the cylinder head. Turn the socket counterclockwise to unscrew the spark plugs.
What tool do I need to change spark plugs?
The Tools Needed To Change Spark Plugs
- Your vehicle’s owner’s manual.
- A spark plug socket.
- A wobble socket.
- Spark plug boot puller pliers.
- A flexible handle ratchet.
- A torque wrench.
- A spark plug gap gauge.
What size socket for Subaru spark plugs?
Remove The Spark Plugs
With a 14mm spark plug socket and short extension, remove the spark plugs.
What is the best tool to remove spark plugs?
Ratchet wrench
This common tool is available in assorted drive sizes and configurations (short, standard, long-handled and flex-head). For removing spark plugs, a longer-handle, flex-head ratchet is the way to go, but a standard ratchet will also work. Ratchets with 72 teeth work better in confined spaces.
What is the spark plug gap on a 2006 Subaru Forester?
Notes: Gap . 043″ 1.1 mm. Iridium XP.
Where are the spark plugs in a 2006 Subaru Forester?
A spark plug sits above each cylinder head in your engine and “fires” to ignite the compressed fuel and air mixture in the cylinder.
