Honda Wheel Nut Thread Size
The thread size for Honda wheel nuts is M12 x 1.5. This specification is consistent across different models and is used on many Honda sedan models like Accord and Civic.
It’s important to use the correct size socket and torque spec to avoid stripped nuts or a loose wheel. Always check the owner’s manual or the wheel itself to verify the exact lug nut measurements for your specific vehicle.
Contents
- What size is the thread on a Honda wheel stud?
- Are lug nuts universal thread?
- What type of thread is a wheel stud?
- What size are the lug nuts on a Honda CRV?
- What is the thread pitch of a civic lug nut?
- What is the standard thread for lug nuts?
- Are lug nut threads universal?
- What size lug nuts do Hondas use?
- Are all Honda bolts metric?
- Do all Hondas have the same lug pattern?
What size is the thread on a Honda wheel stud?
12×1.5mm
As with all genuine Honda products expect a perfect fitment and performance every time. Overall length 42.5mm, spline diameter 12.2mm, thread pitch 12×1. 5mm.
Are lug nuts universal thread?
To safely install your wheels, it’s important that the lug nut size matches your vehicle’s requirements. If your lug nuts or lug bolts don’t match your vehicle’s thread pitch, they won’t work on your ride.
What type of thread is a wheel stud?
As with almost all threads used in the automotive industry, the thread type for wheel studs and wheel hubs is a metric fine thread (MF or also M) with a flank angle of 60 degrees. For the American region, the inch equivalent of the metric fine thread is the American fine thread Unified National Fine Thread (UNF).
What size are the lug nuts on a Honda CRV?
Honda CRV Lug Nuts Sizes
2002-2006: 12×1.5 mm, 19mm socket. 2007-2011: 12×1.5 mm, 19mm socket. 2012-2016: 12×1.5 mm, 19mm socket. 2017-2021: 12×1.5 mm, 19mm socket.
What is the thread pitch of a civic lug nut?
The most common thread sizes of Honda Civic lug nuts are M12x1. 5mm. Knowing the thread size can narrow down the options. The best Honda Civic lug nuts are the ones that fit the vehicle and meet your requirements perfectly.
What is the standard thread for lug nuts?
The thread size or thread diameter is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (7/16″, 1/2″, etc.) or metric (12mm, 14mm, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.
Are lug nut threads universal?
To safely install your wheels, it’s important that the lug nut size matches your vehicle’s requirements. If your lug nuts or lug bolts don’t match your vehicle’s thread pitch, they won’t work on your ride. Lug nut sizes are given in two numbers.
What size lug nuts do Hondas use?
The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.
Are all Honda bolts metric?
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware.
Do all Hondas have the same lug pattern?
The simplest answer to this question is: it depends. The years of each vehicle vary slightly in the number of lugs as well as the pattern of the bolts. For example, the wheels from a 2003 Honda Accord will fit on a 2006 Honda Civic but not a 2005.
