AHG Auto Service » Make » Honda » What temperature should Honda City thermostat be?

What temperature should Honda City thermostat be?

The normal operating temperature for a Honda City is approximately 190°F/88°C. However, the temperature may vary depending on external conditions and usage. For example, the temperature may run cooler when driving at highway speeds in winter with the heater on, or warmer in summer when running parked with the air conditioning running. The temperature range between 185°F/85°C and 210°F/99°C should be considered normal.
It is important to note that a malfunctioning thermostat can lead to various issues and should be dealt with immediately. Some common symptoms of a bad thermostat include no heat, a spiked temperature gauge, a blown head gasket, and more. If the thermostat is stuck open, the engine may not reach the proper operating temperature, which can result in decreased fuel efficiency and other problems .
The thermostat in a Honda City’s engine plays a crucial role in regulating its temperature. It opens up once the engine reaches operating temperature and allows coolant to flow through the radiator, where it gets cooled before returning to the engine. By controlling the flow of coolant, the thermostat helps maintain a consistent engine temperature, regardless of external conditions .
In terms of thermostat replacement, it is generally recommended to use the stock thermostat or a thermostat with a similar temperature rating. Using a low-temperature thermostat can cause tuning problems and may not provide the desired benefits. Similarly, using a high-temperature thermostat may not be necessary and can potentially affect the engine’s performance.
If you suspect any issues with your Honda City’s thermostat or cooling system, it is recommended to have it checked and repaired by a qualified mechanic to ensure proper functioning and prevent any potential damage to the engine.
Please note that the information provided here is based on general knowledge and may not apply to specific models or situations. It is always best to consult the owner’s manual or contact a Honda dealership for precise information regarding your Honda City’s thermostat and cooling system.

What is the normal coolant temperature for a Honda City?

Your Honda has a normal temperature range, usually 195 to 200 degrees Fahrenheit (although you should consult your owner’s manual for specifics).

What temperature should my thermostat be?

Generally speaking, the most efficient temperature for your thermostat is between 18°C and 20°C. If you set the thermostat any higher, then you’ll find that your property is very warm and it may be unsafe for babies and people with heart conditions.

Is 210 a good coolant temp?

Most experts agree that your engine should run between 195 degrees and 220 degrees. In ideal situations, your needle will maintain a posture right in the middle of your gauge.

Is a 180 or 160 thermostat better?

A 180-degree thermostat is better for engine efficiency—aka better fuel mileage and decreased emissions. A 160-degree thermostat is designed to maintain a lower engine operating temperature, which tends to make a little bit more horsepower and torque.

What temperature is too low for thermostat?

As explained, 55 degrees is usually considered the lowest thermostat setting to avoid frozen pipes.

Should I use 180 or 195 thermostat?

If your engine calls for 180, then go with 180. If it calls for 195F, then run 195F. Deviating away from the factory thermostat on computer controlled OBD-II engines will cause drivability problems, or even engine troubles down the road.

What temperature does a 160 degree thermostat open?

In general, your temperatures don’t seem terribly high for the T-stat you have installed. They may be undesirable for a salt water RWC motor, but not unusual. Remember that the 160 degree thermostat is not going to open until the coolant temp reaches 160 degrees or so.

What temperature should my thermostat be set at in the summer?

78 degrees
What is a Good Temperature to Set Your Thermostat in the Summer? Every season has an ideal thermostat temperature and for summer the U.S. Department of Energy suggests that when home, 78 degrees is the sweet spot between staying cool and keeping your energy bill low.

Is 230 too hot for coolant?

Depends on the engine and the reason the temp is that high, but in general, 230 degrees is an acceptable oil or coolant temperature. Many engines run at around 230 degrees during normal operation and most engines will tolerate 230 degrees no problem.

What temp should a 180 thermostat run?

As an example, a 180 degree thermostat should start to open at 177 – 183 degrees, and will not be fully open until the coolant around it is 195 – 200 degrees.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment