The thermostat temperature on a Toyota 22RE can vary depending on the specific model and year. However, based on the information from the search results, it appears that the factory thermostat for a Toyota 22RE is typically set at 190 degrees Fahrenheit. Some users have reported running a 180-degree thermostat in their 22RE engines , while others have mentioned using a 195-degree thermostat. It’s important to note that the temperature at which the thermostat opens is not the same as the operating temperature of the engine. The operating temperature can vary depending on factors such as driving conditions and modifications to the cooling system.
Contents
- What is the right temperature for thermostat?
- What temperature is the thermostat on a 22RE?
- How much horsepower does a 22RE have?
- Is 175 compression good?
- How much HP can a stock 22RE handle?
- How do I know if my engine compression is good?
- What is the normal compression for a 22RE engine?
- Are all 22RE engines the same?
- How long do 22RE engines last?
- What is a good temperature for my thermostat?
What is the right temperature for thermostat?
If someone is at home in the daytime, 72° F (22° C) is a good start, but aim for 68° F (20° C). If everyone is away from home in the daytime, or you’re asleep at night, we feel 66° F (19° C) to 62° F (17° C) is best.
What temperature is the thermostat on a 22RE?
190 degree
It’s still a 190 degree thermostat like the original, but it has a second, smaller wax slug to help to help solve a very specific issue under certain circumstances.
How much horsepower does a 22RE have?
The first fuel injected 22R-E engines appeared in August 1982. Output of these engines is commonly rated at 78 kW (105 hp; 106 PS) at 4,800 rpm and 185 N⋅m (136 lb⋅ft) at 2,800 rpm.
Is 175 compression good?
Most new engines in good condition compress at around 175 psi. If we look at the example above, we find that the #4 cylinder at 160 psi is O.K. But let’s compare it with the cylinder having the highest pressure level at 175 psi.
How much HP can a stock 22RE handle?
The practical limit for a 22RE head is about 180HP for N/A and probably 350 hp for turbo. After that you’ll be spending some serious money for better airflow (N/A) or a lot stronger parts throughout the engine (turbo).
How do I know if my engine compression is good?
How to Perform a Compression Test
- Remove one spark plug and make a note of which cylinder it is.
- Install the adapter that matches the plug threads into the cylinder head.
- The adapter needs to seal to the head.
- Crank the engine using the starter.
- Read the gauge and take note of the pressure.
What is the normal compression for a 22RE engine?
Re: 22re compression
Toyota spec is 114 on the low side but normal should be 171. If you plan to rebuild that engine then continuing to drive it could be a risk.
Are all 22RE engines the same?
All 22R and RE’s from 1985 up are the same, and will NOT interchange with the pre-1985 22R and RE’s. The “E” denotes EFI, so a post ’85 could be an R or RE depending on whether it was carbed of injected. The pre-85 EFI is different than the ’85+, and won’t interchange.
How long do 22RE engines last?
The 22R or RE seems to last half a million miles or more. At this point though, it is so dated, that I would never purchase one. The Tundra V8 can do the same thing. So can the Camry in any configuration.
What is a good temperature for my thermostat?
Energy.gov suggests that 68 degrees is a good room temperature while you’re awake at home but recommends lowering it while you’re asleep or away. Lowering your thermostat 7-10 degrees for eight hours a day can reduce your annual heating expenses by as much as 10 percent.
