AHG Auto Service » Make » Subaru » What stud pattern is Subaru Legacy?

What stud pattern is Subaru Legacy?

The stud pattern for the Subaru Legacy varies depending on the specific model and year. However, based on the search results, it appears that the most common stud pattern for the Subaru Legacy is 5×114.3. This means that the wheel has 5 bolt holes or studs, and they are spaced 114.3 millimeters apart from each other.
It’s important to note that stud patterns can vary across different generations and facelifts of the Subaru Legacy, so it’s always recommended to double-check the specific stud pattern for your particular model and year.
Let me know if there’s anything else I can help with!

What Subarus have a 5×100 bolt pattern?

You can find the perfect size and offset – but if you don’t know your bolt pattern, you’re in a world of trouble when it comes to finding the perfect wheels. All Subaru Impreza WRX through 2014, the 2004 WRX STi, and standard Impreza models use a 5×100 bolt pattern. Everything else uses a 5×114.

Are 5×114 3 to 5×100 the same?

5×114. 3 is going to give you more wheel options, as 5×100 is only used by a few manufacturers. However, 5×100 is probably used for more rally wheel setups, as they are typically smaller diameters (14,15,16), as opposed to the 114.3’s which are typically larger diameter wheels (16,17,18).

Are 5×100 and 5×114 3 the same?

5×114. 3 is going to give you more wheel options, as 5×100 is only used by a few manufacturers. However, 5×100 is probably used for more rally wheel setups, as they are typically smaller diameters (14,15,16), as opposed to the 114.3’s which are typically larger diameter wheels (16,17,18).

Will a 5×100 bolt pattern fit a 5×114?

They are referring to the bolt pattern. 5 studs 100mm apart, or 114.3mm apart. No, they are not interchangeable. You need the 5X100.

What vehicles does 5×114 3 fit?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

Is a Subaru Legacy the same as a Subaru Outback?

Aside from other small differences in trim, the Outback shares almost all of its components with the Legacy donor model. When launched in Australia in 1996, the name “Legacy Outback” was shortened to “Outback”, followed in other markets afterwards.

What wheels fit a Subaru Legacy?

Subaru Legacy Wheel FAQs
Depending on its year model and trim level, the Subaru Legacy typically comes with a range of stock wheel sizes, including 17-inch rims and 18-inch rims.

What is Subarus lug pattern?

Generally speaking, modern Subarus are built with a 5x100mm bolt pattern, while older Subarus have a 4×114. 3mm bolt pattern. However, there are exceptions to this rule and some models may differ. Therefore, it is important to check the specific wheel specs for your vehicle before making a purchase.

What Subaru has 5×114 3 bolt pattern?

3 What is the bolt pattern on a Subaru Outback?

Are all Subaru wheel studs the same?

No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment