What small blocks did Ford make?

Ford Small Blocks
Ford has produced several small block engines throughout its history. Here are some of the notable small block engines made by Ford:
1. 221: The 221 cubic inch small block engine was introduced in 1962 and was used in various Ford vehicles. It was part of the Windsor family of engines.
2. 260: The 260 cubic inch small block engine was introduced in 1962 and was also part of the Windsor family of engines.
3. 289: The 289 cubic inch small block engine was introduced in 1963 and was used in the Ford Fairlane. It featured screw-in rocker arm studs and valve spring pockets for stability at high rpm.
4. 302: The 302 cubic inch small block engine, also known as the 5.0, was introduced in the late 1960s. It became one of Ford’s most versatile engines, powering a wide range of vehicles from sports cars to pickup trucks.
5. 351W: The 351 Windsor is a raised-deck small block engine introduced in 1969. It was developed in response to the cubic inch race happening in Detroit. While the 221/260/289/302 engines were manufactured at Ford’s Cleveland engine plant, there are crossovers that require clarification. Not all 289/302 blocks and heads were cast at the Cleveland foundry.
6. 255: The 255 cubic inch small block engine was a short-lived chapter in Ford’s small block history. It was fitted with either the 49-state Motorcraft 2150 carburetors or the California-only Motorcraft VV carburetor.
7. 460: While not a small block engine in the traditional sense, the Ford 460 cubic inch big block engine is worth mentioning. It was a popular engine known for its ability to churn out high levels of torque. The 460 V8 found its place in Ford’s family of pickups and gained aftermarket popularity as a crate motor.
Please note that this is not an exhaustive list of all the small block engines produced by Ford, but it covers some of the notable ones.

Is a Ford 406 a big block?

A: Charles, the biggest engines Ford offered those years over 400 cubic inches were the 406 in 1962 and the 427 in 1963. Both were big-block “FE” engines and ran very well.

What’s the difference between a 302 and a 351 Windsor?

So for equal money, a 351 will have more cubes, more low end torque, and a lower RPM peak. A 302 will have the same HP, but a slightly higher tq peak with lower tq numbers. In almost any situation, cubes are better. Unless you can make your goals cheaper with the super-cheap 302.

Is a 5.0 and a 302 the same?

They are the same when the part store ask you this question. 302 is the cubic inches of the engine and 5.0 (actually 4.9) is the oil capacity. So your engine is a V-8 5.0 liter 302 cubic inches.

Did Ford make a 352 engine?

In 1960 Ford created a high-performance version of the 352 rated at 360 horsepower (270 kW) it featured an aluminum intake manifold, Holley 4160 4-barrel (4-choke) carburetor, cast iron header-style exhaust manifolds, 10.5:1 compression ratio, and solid lifters.

Did Ford make a 400 small block?

One oddity of the 400 is that, although it is technically a small-block, the transmission side of its bellhousing mimics the 429 and 460 big-blocks. It also uses the same motor mounts as a 429 and 460.

What years did Ford make the small block?

Ford small block engine

Ford small block
Production	July 1961 – 2002
Layout
Configuration	Naturally aspirated 90° V8
Displacement	221 cu in (3.6 L) 255 cu in (4.2 L) 260 cu in (4.3 L) 289 cu in (4.7 L) 302 cu in (4.9 L) 351 cu in (5.8 L)

Is the 351M a big block or small block?

The 351 M and Cleveland are considered small block engines. The FE which included the 352, 360, 390, 427, 428 , in modified form the 427 side oiler, and 427 SOHC were definitely big block engines.

Did Ford make a 260 V8?

From 1962 to 1964 1/2, Ford used the 260 V8 engine. This engine was the predecessor to the 289. The 289 was developed in 1963. The main difference between a 260 and a 289 is the 260 has a 6 inch space between the motor mount bolt holes, while the 289 has a 7 inch space.

Is a 302 a small block Ford?

The Ford small block V8 engine’s greatest champion was the 302. Dubbed the 5.0 later in life as the industry moved from cubic inches to liters in describing displacement, it was the workhorse of the automaker’s line-up, pulling duty in everything from sports cars to vans to pickup trucks.

Did Ford make a 272 engine?

Ford introduced the 239ci Y-block in 1954 in Fords and a 256ci version in Mercurys to replace its flathead V-8 introduced more than two decades earlier in 1932. Ford quickly grew the Y-block to 272, 292, and finally 312 ci in most of the lineups by 1956.