What small blocks did Dodge make?

Dodge has produced various small blocks over the years. The Dodge small block engines were part of the LA engine family, which included the 318 and 360 engines. These engines were essentially from the same engine block but had some differences in specifications.
The Dodge small block engines were used in a range of vehicles, including:
– Dodge Challenger
– Dodge Charger
– Dodge Dart
– Dodge Demon
– Dodge Super Bee
– Plymouth Barracuda
– Plymouth Duster
– Plymouth Road Runner
– Plymouth Sport Fury GT
– Monica 560
– Hongqi CA770
– Chrysler Valiant Charger (Australia)
These engines were used in various models and years, and it’s important to note that the availability of specific engines may vary depending on the model and year of the vehicle.
It’s worth mentioning that Dodge also produced big block engines, which were larger and more powerful than the small block engines. The big block engines were used in vehicles like the Dodge Charger and Plymouth Road Runner.
Please note that this information is based on the search results provided and may not include all the small block engines produced by Dodge. For more detailed information, I recommend conducting further research or consulting reliable automotive sources.

What’s the difference between a 383 and a 383 Magnum?

What is the difference between a 383 and a 383 magnum? Those are engine designations, not a gun’s caliber. The difference would be horsepower for the most part.

What big blocks did Dodge make?

The RB-Series Big Block was available in the following variants:

• 383 cubic inch V8 (1959-60 only, not to be confused with the 383 B-series)
• 413 cubic inch V8.
• 426 cubic inch V8 aka “426 Wedge”
• 440 cubic inch V8.

What was Dodge’s smallest V8?

In 1953, Dodge unveiled its own V8, the Red Ram, and it was the smallest of the three Hemi V8s at introduction with just 241 cubic inches. (Plymouth would get a V8 in 1955 as well, but it wasn’t a hemi.)

Did Dodge make a 318 Hemi?

The VC and VE Valiants had the 273 V8, but the new VF Valiant in 1969 was fitted with two versions of the “new” Hemi 318 V8. The 318 V8 was only fitted to the 200 series Dodge trucks and up, as I recall, from about 1967 or 1968.

Is a Dodge 5.2 a 318?

The 5.2L Magnum, released in 1992, was an evolutionary development of the 318 cu in (5.2 L) LA engine with the same displacement. The 5.2L was the first of the Magnum upgraded engines, followed in 1993 by the 5.9L V8 and the 3.9L V6.

Is a 5.9 Magnum a good engine?

The all iron 5.9 Magnum proved to be a strong little combination, despite its production short-block. We tagged the 400 hp mark at 5,600 rpm, and watched the engine pull cleanly and make power to over 6,000 rpm.

Was the 318 a good engine?

a 318 will run dang near forever with regular maintenance. Black block not known but the Mopar/Chrysler 318 was a nearly bullet proof engine with excellent power and revving qualities while using a little less gas than the 340.

Did Dodge make a 318 big block?

Most commonly known as the “wide-block 318,” “big-block 318,” or “Poly 318,” official Chrysler nomenclature describes it as the A479 or A-series 318.

Did Dodge make a 383 engine?

In some Dodge applications, this engine was labeled as the Magnum, while the Plymouth version was called the Golden Commando. Both came with a dual point distributor in high-performance versions. The 383 became the standard model Mopar performance engine for the next decade.

Is the 5.9 Magnum a small block?

On the positive side, technology has marched forward, and the vintage V-8 cores of the 1960s and ’70s have been replaced in those same scrapyards by 318- (5.2L) and 360ci (5.9L) Magnum small-blocks from the 1990s.