What size wrench is the fan clutch on a 2006 Ford Explorer?

Fan Clutch Wrench Size for 2006 Ford Explorer
To remove the fan clutch on a 2006 Ford Explorer, you will need a specific size wrench. The search results provide some conflicting information, but the most commonly mentioned sizes are 1-7/16″ and 36mm. Here are some details from the search results:
– One source mentions that the fan clutch nut is 1-7/16″.
– Another source indicates that the fan clutch nut is 36mm.
– Additionally, there are special tool sets available for removing the fan clutch from the water pump, which can be rented from auto parts stores for a small cost.
It’s important to note that there may be variations in the specific size required, so it could be beneficial to verify the size with a professional or by consulting the vehicle’s manual.

What size is the fan clutch nut on a 2008 Ford Expedition?

The fan clutch nut is 36mm. If you have an Autozone, Advanced Auto Parts or OReillys nearby you can rent the Ford fan clutch tool from them and get your money back when you return it. The clutch fan assembly, I think has a left hand treadranger: hi i am replacing a waterpump on a 2004 ford ranger …

What size wrench for fan clutch on 2006 Dodge Durango?

Wrench size: 36 x 48mm (17/8″ x 17/16″). Removes and installs fan clutch assemblies, and also for replacing water pumps. Applications: RAM, Durango, Magnum, Charger, Challenger, 300, Aspen, Grand Cherokee & Commander.

What size is the nut on a fan clutch?

The fan clutch “nut” is 36 mm. You can use a 1 7/16″ wrench which will be loose but will work, or you can take a 1 3/8″ wrench and grind the open end to fit.

What size is a fan clutch wrench?

They’re made of hardened steel to withstand the incredible force required to remove this nut, and they’re often powder coated or painted to prevent corrosion since they’re used infrequently. Common sizes for fan clutch wrenches include 22mm, 36mm, 39mm, 47mm, and 50mm.

What is a fan clutch holding tool?

The OEM tools Fan Clutch Holding Tool is designed to hold the water pump pulley in place to remove the fan clutch. Place the holding tool around the water pump pulley retaining bolts. Depending on the vehicle, you can use the hooks to engage the retaining bolts, or you can use the holes located on the jaws of the tool.

What tools do you need to remove a fan clutch?

And what i’m going to do is use the mallet. And just tap down on top of the wrench and then that should shock it. Off.

Which way do you turn a fan clutch to remove it?

To remove the fan clutch, install a large crescent wrench onto the clutch’s nut, and hit it using a hammer to loosen the fan. If you are unsure about which way to loosen the fan nut, it’ll always loosen in the same direction as the fan when the engine is running.

What size is the fan clutch nut on a 2005 Ford f150?

The fan clutch nut is 36mm. If you have an Autozone, Advanced Auto Parts or OReillys nearby you can rent the Ford fan clutch tool from them and get your money back when you return it.

How do you use a Ford fan clutch removal tool?

While holding the water pump pulley in place break the fan clutch nut free with the slim style wrench. As you remove the fan do not let it touch the radiator.

What size wrench for Ford 4.9 fan clutch?

Fan clutches can be a hassle to remove when you don’t have the appropriately size clutch wrenches. These clutch wrenches are 36 MM and 57 MM in width giving you the perfect size for work on Fords.