Toyota Lug Nut Wrench Size
The lug nut size for Toyota vehicles is 21mm. This means that a 21mm wrench or socket is the correct size for removing and installing lug nuts on Toyota vehicles. While a 13/16″ wrench may sometimes work, it’s important to use the correct 21mm wrench to avoid damaging the lug nuts or their threads [[6]].
It’s worth noting that using a 6-point socket on lug nuts is recommended to eliminate any possibility of rounding off the corners of the lug nut.
Contents
- What size socket is my lug nut?
- Does Toyota use metric lug nuts?
- What size is Toyota lug nut?
- Is 13 16 and 21mm the same?
- What size is a Toyota wheel wrench?
- Does Toyota use metric nuts?
- What size socket for Toyota Corolla lug nuts?
- What size wrench for Toyota Rav4 lug nuts?
- What size socket do I need for lug nuts?
- Will a 13 16 socket fit a 21mm nut?
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Does Toyota use metric lug nuts?
The nut and bolt threads themselves are definitely metric.
What size is Toyota lug nut?
12×1. 5 Chrome Mag Lug Nuts fits Factory Toyota/Lexus OE Alloy Wheels
| Thread Size: | 12×1.5, 12×1.5mm, 12mmx1.5, M12x1.5 |
|---|---|
| Hex/Wrench Size: | 21mm – 13/16″ |
| Overall Length: | 1.47″ |
| Shank Diameter: | 18mm |
| Construction: | Through-Hardened Steel |
Is 13 16 and 21mm the same?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
What size is a Toyota wheel wrench?
Additional information
| Hex Size | 21mm Hex |
|---|---|
| Thread Size | M12 x 1.5 |
| Seat | Flat Seat |
| Type | Wheel nuts |
| Finish | Chrome Plated |
Does Toyota use metric nuts?
Japanese cars, including those from Toyota, typically use metric measurements.
What size socket for Toyota Corolla lug nuts?
The socket size of a GR Corolla lug nut is 21mm (13/16″). Most car wheel nuts are hex shaped. Some locking lug nuts are designed with special spline drive shape heads, which make them hard to be stolen due to their irregular shapes.
What size wrench for Toyota Rav4 lug nuts?
The lug nut size for a Toyota Rav4 is M12 x 1.5 or hex size is 21 mm. This means that the lug nuts have a diameter of 12 mm, a thread pitch of 1.5 mm, and a hexagonal shape that fits a 21 mm socket or wrench.
What size socket do I need for lug nuts?
The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Will a 13 16 socket fit a 21mm nut?
But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.
