Wrench Size for Subaru Spark Plugs
The size of the wrench needed to remove and install spark plugs in a Subaru varies depending on the specific model and year. However, based on the information from the search results, it is recommended to use a 5/8 inch spark plug socket for most Subaru models. Some newer models, such as the 14+ XTs, may require a thin wall 14 mm spark plug socket instead. It’s important to use the correct size to avoid the risk of damaging the spark plug hex or encountering difficulties during the removal and installation process .
If you have a specific Subaru model and year, it’s advisable to consult the vehicle’s manual or a trusted mechanic to confirm the exact wrench size required for the spark plugs.
Contents
- Is it hard to change spark plugs on Subaru?
- What size is a 5 8 spark plug socket in mm?
- What size socket for spark plugs on a 2006 Subaru Forester?
- Is there a special tool to remove spark plugs?
- Do I need a special socket for spark plugs?
- How often do you need to change spark plugs on a Subaru?
- What size socket do I need to remove spark plugs?
- What brand of spark plugs does Subaru use?
- What are the two sizes of spark plug wrenches?
- How do you remove spark plugs from a Subaru?
Is it hard to change spark plugs on Subaru?
And reinstalling the spark plug wire or ignition coil on top of it it goes the same way it’s just the location. And the access to it that make it more difficult on the subaru.
What size is a 5 8 spark plug socket in mm?
16
Spark Plug Socket Sizes and Their Specific Applications
| Socket Size (in inches) | Socket Size (in mm) |
|---|---|
| 5/8 | 16 |
| 3/4 | 18 |
| 3/4 | 19 |
| 11/16 | 18 |
What size socket for spark plugs on a 2006 Subaru Forester?
Side get that vacuum line out of the way. And the ignition coils just pull right out. Well it might take a bit of finagling anyways.
Is there a special tool to remove spark plugs?
Ratchet and Socket Extensions
Regardless of the socket used, you will need a standard ratchet wrench to fully remove the spark plug. And due to their location on certain machines, you may also need one or more socket extensions on hand in order to successfully access those hard-to-reach spaces.
Do I need a special socket for spark plugs?
Though you can technically use any socket of the right size, we recommend using the kind specifically made to pair with spark plugs. These special sockets contain rubber isolators inside intended to absorb any possible vibration within and protect the glass featured along the spark plug.
How often do you need to change spark plugs on a Subaru?
every 60,000 miles
This means you’ll only have to worry about changing them every 60,000 miles or so. However, every engine and spark plug differs, so we suggest speaking with one of our knowledgeable service advisors for a spark plug replacement interval that works best for your vehicle’s specific needs.
What size socket do I need to remove spark plugs?
What size socket do I need to change out spark plugs? For the majority of plugs, you need a 5/8” or 16mm socket. Some Fords use 9/16″ plugs, some newer European and Asian vehicles use 14mm plugs, and there are a few applications that use 7/8″, 13/16″, ¾” or 18mm plugs.
What brand of spark plugs does Subaru use?
SPARK PLUG & HIGH TENSION CORD
NGK:SILFR6A. NGK:SILFR6A.
What are the two sizes of spark plug wrenches?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.
How do you remove spark plugs from a Subaru?
For Subarus with ignition coils, carefully remove the retaining bolts or screws securing the coils in place and disconnect the electrical connectors. Using a ratchet or spark plug socket, loosen and remove the old spark plugs from the cylinder head. Turn the socket counterclockwise to unscrew the spark plugs.
