Wrench Size for Lug Nuts on Ford F150
To remove and install Ford F150 lug nuts, a 21mm socket is needed. This is the standard size for most F150 models from 2004-2025, with some exceptions for older classic F150s from the 1990s or earlier.
If you are changing your lug nuts, it’s important to be aware of which size fits your F150 based on the year. Ford has used different sizes and construction of lug nuts over the years, so it’s essential to verify the specific size for your vehicle.
In summary, for most F150 models from 2004-2025, a 21mm socket and wrench are required to remove and install the lug nuts.
Contents
- Are Ford lug nuts metric or standard?
- Is 13 16 the same as 21mm?
- What power tool do I need to remove lug nuts?
- Will a 13 16 socket fit a 21mm nut?
- What size are Ford F150 lug nuts?
- What size is a standard lug wrench?
- What size socket do I need to remove lug nuts?
- What size wrench for Ford lug nuts?
- What metric wrench is close to 13 16?
- Are all Ford wheel nuts the same size?
Are Ford lug nuts metric or standard?
Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.
Is 13 16 the same as 21mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
What power tool do I need to remove lug nuts?
Impact wrenches
Impact wrenches deliver more torque than impact drivers and are used for heavy-duty tasks such as removing lug nuts or large bolts. Impact drivers, on the other hand, are more compact and used for driving screws and smaller bolts.
Will a 13 16 socket fit a 21mm nut?
But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.
What size are Ford F150 lug nuts?
Specification of F150 Wheel Nuts: 14×1. 5 Thread, 13/16 Hex, 40mm Height, Conical 60 Degree Seat.
What size is a standard lug wrench?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size wrench for Ford lug nuts?
1/2” torque wrench and a 21mm socket. That’s all you need.
What metric wrench is close to 13 16?
Wrench Size Chart
Bolt Diameter | Metric | Standard |
---|---|---|
1/2″ | 19mm | 3/4″ |
9/16″ | 21mm | 13/16″ |
22mm | 7/8″ | |
5/8″ | 24mm | 15/16″ |
Are all Ford wheel nuts the same size?
Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.