What size wrench for Ford 4.9 fan clutch?

Wrench Size for Ford 4.9 Fan Clutch
The size of the wrench needed to remove the fan clutch on a Ford 4.9 engine is 1-7/16-Inch (36mm) and 2-1/4-Inch (57mm). These wrench sizes are used to remove the fan clutch assembly on various Ford engines, including the 4.9-liter engines in Ford E and F series trucks, Bronco II, Ranger trucks, Aerostar vans, and Explorer. The wrenches are designed to be 13-1/2 inches long and are specifically tailored for the thermostatic fan clutch assemblies on these vehicles.
It’s important to note that the specific size may vary depending on the model and year of the vehicle. Therefore, it’s recommended to verify the size of the fan clutch nut before attempting to remove it to ensure the correct wrench size is used.

What size is the nut on a fan clutch?

The fan clutch “nut” is 36 mm. You can use a 1 7/16″ wrench which will be loose but will work, or you can take a 1 3/8″ wrench and grind the open end to fit.

How tight should a fan clutch be?

I installed a new fan clutch. The bentley manual says to tighten the bolt by hand and then pound on the wrench once with your fist. It is supposed to be torqued to 40 lbs.

What size is the fan clutch nut on a 1998 Ford f150?

The fan clutch nut is 36mm. If you have an Autozone, Advanced Auto Parts or OReillys nearby you can rent the Ford fan clutch tool from them and get your money back when you return it.

What are symptoms of a bad fan clutch?

How to Tell If Your Fan Clutch Is Going Bad?

• Vehicle overheating. An overheating engine is often the first symptom that is commonly associated with a bad or failing fan clutch.
• Loose and Wobbling Fan.
• Excessively loud cooling fans.
• A decrease in acceleration, power & fuel efficiency.

How do you loosen a fan clutch nut?

The fan that is quite sizable. So with the just pull right on the fan out we can begin striking it downward. There we go came loose. Now we can remove our pipe wrench. Here.

Which way do you loosen a fan clutch nut?

So in order to do that it needs to spin this way. Right. So whatever way the fan needs to spin. That’s the way you hit it to loosen that nut so you can remove the fan so Fan’s been in this way.

Is it OK to drive with a bad fan clutch?

Originally Answered: What happens if you keep driving with a bad fan clutch? If it is merely slipping it could cause overheating whenever you are stopped for long. If it is wobbly it could cause damage to the radiator and/or anything else it may hit, including fan belts or hoses.

What size is a fan clutch wrench?

They’re made of hardened steel to withstand the incredible force required to remove this nut, and they’re often powder coated or painted to prevent corrosion since they’re used infrequently. Common sizes for fan clutch wrenches include 22mm, 36mm, 39mm, 47mm, and 50mm.

What tools do you need to remove a fan clutch?

And what i’m going to do is use the mallet. And just tap down on top of the wrench and then that should shock it. Off.

What size wrench is the fan clutch on a 2006 Ford Explorer?

It is 1-7/16″ wrench. But there is a special tool set that is used to remove the fan clutch from the water pump.