What size wrench for Dodge fan clutch?

Wrench Size for Dodge Fan Clutch
The wrench size needed for the fan clutch on a Dodge varies depending on the specific model and engine. However, based on the search results, the most commonly cited wrench size for Dodge fan clutches is 36mm . This size is suitable for various Dodge models, including RAM, Durango, Magnum, Charger, Challenger, 300, Aspen, Grand Cherokee, and Commander.
It’s important to note that fan clutches come in different sizes and designs tailored to specific vehicle cooling system needs, so it’s essential to verify the specific size needed for the particular Dodge model in question. Additionally, some sources mention the use of adjustable wrenches as an alternative to buying a specific tool.
If you have a specific Dodge model in mind, it’s recommended to verify the exact wrench size needed for its fan clutch to ensure the correct tool is used for the job.

What size wrench needed for fan clutch?

The fan clutch “nut” is 36 mm. You can use a 1 7/16″ wrench which will be loose but will work, or you can take a 1 3/8″ wrench and grind the open end to fit. (Some places offer cheap wrenches make in China that you don’t mind modifying.)

How tight should a fan clutch nut be?

The fan nut is a left hand thread, which naturally wants to tighten as the engine runs. So as long as you snugged it up good (and it sounds like you did) you are good to go.

What size are the bolts on the fan clutch?

5/16”
Many aftermarket clutch manufacturers have chosen to over consolidate fan clutches with the 5/16” bolt hole for both standard and reverse rotation clutches. If the fan clutch has previously been replaced with an aftermarket unit, the OEM bolts may have been replaced with smaller 5/16” aftermarket supplied bolts.

What tools do you need to remove a fan clutch?

And just tap down on top of the wrench and then that should shock it. Off. Of course while pushing on the wrench to rotate. It clockwise and there we go. That’s the fan clutch loose.

How do you tell if a fan clutch is stuck engaged?

Engine seems to ‘roar’ when you set off in first gear.
In low gears, especially at start-up, the fan should not be engaging fully. If you’re noticing a tell-tale ‘roar’, then you could potentially be looking at a locked-in fan clutch.

What size wrench for fan clutch on 2006 Dodge Durango?

it’s a 36 mm. large crecent or small pipe wrench works very well.

Which way do you loosen a fan clutch nut?

Let’s set that up on. There. Human now look at that oh we’re not on a crate oh there we go all right let’s give her a hit. Put that over there.

Is a RAM fan clutch reverse thread?

It depends on the MODEL YEAR of your Ram Turbo Diesel truck, as follows: Here is a sometimes tip: Often a reverse, left-hand thread designed nut is made with a dash mark on the top of the nut. However, “often” doesn’t mean always… hence this long note that we’re sending with our fan clutch removal tool.

Which way do you turn a fan clutch to remove it?

To remove the fan clutch, install a large crescent wrench onto the clutch’s nut, and hit it using a hammer to loosen the fan. If you are unsure about which way to loosen the fan nut, it’ll always loosen in the same direction as the fan when the engine is running.

Which way do you turn a fan clutch nut?

So now based off what i just told you we know that this is regular threads it is lefty loosey righty tighty. So i’m gonna install. This. So if you’re wondering.