AHG Auto Service » Make » Toyota » What size wiper blades for Toyota Starlet ep91?

What size wiper blades for Toyota Starlet ep91?

The Toyota Starlet EP91 uses standard hook fit wiper blades for both the front and rear windshields. The earlier models of the Starlet EP91 use 20-inch wiper blades for the driver’s side and 17-inch wiper blades for the passenger’s side. The later models, on the other hand, use 20-inch wiper blades for the driver’s side, 18-inch wiper blades for the passenger’s side, and 17-inch wiper blades for the rear windshield.
Please note that these are general recommendations, and it’s always a good idea to double-check the specific size of your wiper blades before making a purchase.

Can I use 19 inch wiper blades instead of 18 inch?

Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

Is Rainx bad for your windshield?

Rain-X® De-Icer is safe for use on most vehicle surfaces, including windows and mirrors. However, avoid using it on painted surfaces or delicate materials. If unsure, test a small area first.

What size window wipers do I need for my car?

It is most common for windscreen wiper blades to be measured in inches, and come in a range of sizes from 10 inches to 32 inches. To be sure which blade size is suitable for your vehicle, then check your vehicle’s handbook, where it will provide the exact measurements.

Which wiper blades fit my car?

They’re usually measured in inches, in sizes from 10″ to 32″, with one side often being different to the other. To find out what size windscreen wiper blade you need, you can check your vehicle handbook, or use our new windscreen wiper tool to find the right size for your vehicle.

Do wiper blades need to be exact size?

No. You use the size that fits. Often a little smaller on the rear screen than the front, and fitting a too small blade at the rear is less critical. Note that some cars even have different sized wipers between front left and right.

What is the difference between wiper blade size A and B?

Driver side always has an “A” part number. Passenger side can have an “A” or “B” part number depending on the vehicle. Blades with a “B” part number have a greater curvature specifically designed to wrap around the passenger side window for greater visibility and clarity.

How do I know what size my wiper blades are?

If your existing blades are still in good condition, you can measure them to find the correct size replacement blades. To do this, simply measure the length of the rubber blade, not the metal frame. Make sure to measure both the driver’s side and the passenger’s side. They may be different sizes.

Do you buy 2 different size wiper blades?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

Can I use 22 inch wiper blade instead of 24 inch?

Just wondering what wrong can these wipers do to the car glass… Nothing much. 24″ to 22″ won’t cause any issue as the latter is obviously shorter. It could’ve been a problem if it was the other way around.

What size windshield wipers for a 1998 Starlet?

Toyota Starlet Hatchback 1996 – 1999 Wiper Blade Sizes:
Driver Side 20″ (500mm) Standard or Spoiler Hook Fit Wiper Blade
Passenger Side 18″ (450mm) Retrofit Flat Wiper Blade
Passenger Side 18″ (450mm) Standard Hook Fit Wiper Blade
Rear Screen 17″ (425mm) Standard Hook Fit Wiper Blade
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment