AHG Auto Service » Make » Acura » What size wiper blades for Acura RLX?

What size wiper blades for Acura RLX?

Acura RLX Wiper Blade Sizes
The Acura RLX wiper blades are designed for specific models and are not universal, so it’s important to ensure you purchase the correct size for your car model. According to the information available, the wiper blade size for the Acura RLX is as follows:
– Driver Side Wiper Blade Size: 26 inches / 660 mm
– Passenger Side Wiper Blade Size: 19 inches / 500 mm.
Therefore, for an Acura RLX, you would need a 26-inch wiper blade for the driver side and a 19-inch wiper blade for the passenger side.
If you have any further questions or need additional assistance, feel free to ask!

Can I use 24 wiper blade instead of 26?

Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

Can you use wrong size wiper blades?

Does Size Really Matter? Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

How often should you change wiper blades?

about every twelve months
Wiper blades should be replaced about every twelve months. However, colder climates may require replacement sooner. This video shows some of the signs to look for that may indicate it is time to replace your wiper blades.

Do you buy 2 different size wiper blades?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

Which wiper blades fit my car?

You can also identify the right replacement wiper blades by looking in your car’s owner manual, on the side of the old blades or at the boxes of new blades (just look for your car’s make or model on the packaging or leaflet).

Can I use 22 wiper blade instead of 24?

Nothing wrong will happen by using 22″ instead of 24″. All you will get is lesser wiping area. But no damage to be worried about.

Which size wiper blade goes on driver side?

In some designs, the driver’s side is the longer blade and the passenger side is the shorter blade, and in other designs, it is reversed . If you replace your car wiper blades, make sure to use the same size as indicated by your car manufacturer to get the best viewing area for the driver.

How do I know what size wipers I need?

First, check your owner’s manual. While typically an OEM does not provide a standard wiper size, your owner’s manual may provide one, depending on your vehicle’s make and model. If that’s not the case, you can either: Using a tape measure, measure your existing wiper blades — driver side, passenger side, and rear.

Should I get bigger or smaller wiper blades?

Wiper blade sizes are designed to cover a certain area of your windshield to provide maximum visibility in stormy weather. Most experts recommend sizing your blade as close to the manufacturer’s instructions as possible to maintain safe driving conditions.

Can you put different size wiper blades on a car?

Does Size Really Matter? Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment