What size wiper blades for a 2010 Dodge Journey?

Wiper Blade Sizes for 2010 Dodge Journey
Based on the information from the search results, the wiper blade sizes for a 2010 Dodge Journey are as follows:
– Driver’s Side: 24″
– Passenger’s Side: 19″
This information is supported by the data provided in the search results. The wiper blade sizes for the 2010 Dodge Journey are specifically mentioned as 24″ for the driver’s side and 19″ for the passenger’s side.
It’s important to ensure that the wiper blades are of the correct size for optimal performance and safety while driving.

Can you use wrong size wiper blades?

Does Size Really Matter? Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

Do you buy 2 different size wiper blades?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

How do you change wiper blades on a Dodge Journey?

And keep it steady while using the other hand to push the blade away from the j-hook. And toward the windshield. With a locking tab open position the replacement wiper blade. Under the j-hook.

Can I use a 28 instead of 26 wiper blade?

Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

How do you change the rear wiper blade on a 2010 Dodge Journey?

Choose the appropriate adapter for your application locks in like the original. Snaps in down close a little cap. Done thanks for watching.

Can you replace the rear wiper blade?

To remove this type of blade, lift up the wiper arm, then turn the blade until it’s tilted 90 degrees from the arm. Pull the wiper away from the arm, and it should pop off. To install the new blade, push the pin in the middle of the blade into the opening on the end of the arm.

What size wiper blades for a Dodge Journey?

12″
Dodge Journey Wiper Size Comparison Chart

Year	Driver Side	Rear
2020	24″	12″
2019	24″	12″
2018	24″	12″
2017	24″	12″

How do I know what size wipers I need?

First, check your owner’s manual. While typically an OEM does not provide a standard wiper size, your owner’s manual may provide one, depending on your vehicle’s make and model. If that’s not the case, you can either: Using a tape measure, measure your existing wiper blades — driver side, passenger side, and rear.

Are front and rear wiper blades interchangeable?

Rear wipers are usually a lot smaller than the fronts, and although plenty of cars have the same style wipers as on the front, some cars feature a model-specific rear wiper with the arm and the blade integrated as one unit.

What size rear wiper blades for 2010 Dodge Journey?

12”
Dodge Journey Windshield Wiper Fitting Guide:
The Dodge Journey uses 24” driver’s side, 18” passenger’s side & a 12” plastic moulded rear screen wiper blade which has a specific fitting.