AHG Auto Service » Make » What size windshield wipers for a 2006 Acura RSX?

What size windshield wipers for a 2006 Acura RSX?

Windshield Wiper Sizes for a 2006 Acura RSX
The windshield wiper sizes for a 2006 Acura RSX are as follows:
– Driver side: 24″ wiper blade
– Passenger side: 20″ wiper blade
These sizes are consistent across multiple sources, including the Acura RSX Wiper Size Chart and specific product listings for the 2006 Acura RSX [[7]].

What size windshield wipers for a 2006 smart?

21″

Smart ForTwo Coupe 2004 – 2006 Wiper Blade Sizes:
Driver Side 21″ (530mm) Standard or Spoiler Hook Fit Wiper Blade
Passenger Side 21″ (530mm) Retrofit Flat Wiper Blade
Passenger Side 21″ (530mm) Standard Hook Fit Wiper Blade
Rear Screen 14″ (350mm) Retrofit Flat Wiper Blade

What size windshield wipers for Acura RSX?

Sizes are 24″ for the driver, 20″ for the passenger and hatch, but as mentioned, you can use a 21″ on the hatch. There’s a 2 types. – And there’s the blade assembly, which you usually find.

Can you use wrong size wiper blades?

Does Size Really Matter? Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

Should I get bigger or smaller wiper blades?

Wiper blade sizes are designed to cover a certain area of your windshield to provide maximum visibility in stormy weather. Most experts recommend sizing your blade as close to the manufacturer’s instructions as possible to maintain safe driving conditions.

What is a vs B windshield wipers?

Driver side always has an “A” part number. Passenger side can have an “A” or “B” part number depending on the vehicle. Blades with a “B” part number have a greater curvature specifically designed to wrap around the passenger side window for greater visibility and clarity.

What size windshield wipers for 2002 Acura RSX?

24″ Wiper blade.

Do I need two different size windshield wipers?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

How do I know what size wipers I need?

First, check your owner’s manual. While typically an OEM does not provide a standard wiper size, your owner’s manual may provide one, depending on your vehicle’s make and model. If that’s not the case, you can either: Using a tape measure, measure your existing wiper blades — driver side, passenger side, and rear.

Can I use 22 wiper blade instead of 24?

Nothing wrong will happen by using 22″ instead of 24″. All you will get is lesser wiping area. But no damage to be worried about.

Should I go up or down a size on wipers?

Does Size Really Matter? Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment