AHG Auto Service » Make » Acura » What size windshield wipers for 2006 Acura TSX?

What size windshield wipers for 2006 Acura TSX?

Windshield Wiper Sizes for 2006 Acura TSX
The windshield wiper sizes for the 2006 Acura TSX are as follows:
– Driver Side: 26″
– Passenger Side: 15″ or 16″.
It’s important to ensure that the replacement wiper blades match these sizes for proper fit and functionality.

What size wiper blades for 2006 Acura TSX?

26″
Acura TSX (2005-2008) Wiper Blade Kit – Set Includes 26″ (Driver Side), 15″ (Passenger Side) (2 Blades Total)

Can I use 22 wiper blade instead of 24?

Nothing wrong will happen by using 22″ instead of 24″. All you will get is lesser wiping area. But no damage to be worried about.

What size window wipers do I need for my car?

It is most common for windscreen wiper blades to be measured in inches, and come in a range of sizes from 10 inches to 32 inches. To be sure which blade size is suitable for your vehicle, then check your vehicle’s handbook, where it will provide the exact measurements.

What does A and B mean in wiper size?

Driver side always has an “A” part number. Passenger side can have an “A” or “B” part number depending on the vehicle. Blades with a “B” part number have a greater curvature specifically designed to wrap around the passenger side window for greater visibility and clarity.

Do wiper blades need to be exact size?

Always consult your vehicle’s owner’s manual before buying new wiper blades. It’ll tell you the exact sizes you need for both the driver’s and passenger’s sides. It’s the easiest way to ensure you get the right fit from the start.

Do you buy 2 different size wiper blades?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

Can I use 24 wiper blade instead of 26?

Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

Can I use a different size wiper blade?

Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.

How do I know my windshield wiper size?

First, check your owner’s manual. While typically an OEM does not provide a standard wiper size, your owner’s manual may provide one, depending on your vehicle’s make and model. If that’s not the case, you can either: Using a tape measure, measure your existing wiper blades — driver side, passenger side, and rear.

How do I know what window wipers to buy?

The numbers you’ll see on the wiper blade box are there to help you choose the right blade quickly – you’ll find the blade product number in your car owner’s manual or on the old blade itself, so you just need to look out for the right code when it comes to replacing!

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment