AHG Auto Service » Make » Ford » What size tires are on a 1998 Ford Contour?

What size tires are on a 1998 Ford Contour?

The tire size for a 1998 Ford Contour depends on the specific trim level and other factors. To determine the tire size for your vehicle, you can follow these steps:
1. Check the sidewall of your existing tires: The tire size information is usually printed on the sidewall of the tire. Look for a series of numbers and letters, such as “205/60R15”. The first number represents the width of the tire in millimeters, the second number represents the aspect ratio (the ratio of the tire’s height to its width), and the third number represents the diameter of the wheel in inches.
2. Consult the owner’s manual: The owner’s manual of your 1998 Ford Contour should also provide information about the recommended tire size for your specific trim level.
3. Use an online tire size chart: You can use online resources, such as tire manufacturer websites or tire size conversion charts, to find the recommended tire size for your 1998 Ford Contour based on its trim level.
Please note that the tire size may vary depending on the specific trim level and optional features of your vehicle. It is always recommended to consult the owner’s manual or contact a professional tire dealer for accurate and up-to-date information regarding the tire size for your 1998 Ford Contour.
Source:
– Tire Size Chart for Ford Contour
– 1998 Ford Contour Tire Size – Best Tires for 1998 Ford Contour
– Ford Contour 1998 – Wheel & Tire Sizes, PCD, Offset and Rims specs

What size tire tolerance?

As a general rule, you want replacement tires that are within 3 percent of the diameter (height) measurement of your existing tires’ diameter — assuming your current tires are what your owner’s manual recommends.

What size tires do I use?

Find the information in your vehicle owner’s manual in the glove compartment or on the tire information sticker on your driver’s side door. Usually those elements contain all the information related to your tire size and specifications as well as the appropriate tire pressure.

What’s the biggest tire size I can fit on my truck?

33”
The two most important factors influencing your final choice are the model of your truck and the size of the rims. On average, if your truck isn’t lifted, you can fit tires up to 33”.

What’s the biggest size tires I can put on my truck?

33”
The two most important factors influencing your final choice are the model of your truck and the size of the rims. On average, if your truck isn’t lifted, you can fit tires up to 33”.

Can I put different size tires on my car?

Different tire sizes, tire brands, and tire styles should never be mixed on the same axle. Tires of different sizes can be mounted on the front and rear axles if approved by the vehicle manufacturer. It is common on high performance sports cars and luxury sedans for the rear tires to be wider than the front tires.

Can I use 235 tires instead of 225?

Can a 235/55/R17 replace a 225/65/R17? Yes. For safety reasons be sure that the replacement tires are rated for both load and speed at or above the specifications for your Vehicle. Be sure to replace the tires in pairs on either the front or rear axles.

What is my truck tire size?

Where can I find my tire size? The tire size for your vehicle and wheels can be found in two places: Sidewall of your tire. Inside frame of the driver side door.

Can I put different size tires on my truck?

A larger tire size can make your truck look and perform better in some situations. But changing tire size too much can affect speedometer and odometer accuracy, handling, steering response as well as safety issues such as tire load capacity.

Are 16 and 17 tires the same?

For the same vehicle, with the same outside diameter tyre, a 16″ wheel with have a deeper profile by about 1/2″, which gives more flex in the tyre (assuming otherwise similar choices in tyre construction). It give a more comfortable ride, and probably a bit quieter too.

How do I know if my truck tires will fit?

If your vehicle is still on its original tires, finding the factory-recommended size is as easy as looking at the tire’s sidewall. Search for a number with three digits separated by “X” or “/.” These numbers may read as “33×12. 50R17” if an imperial (flotation) size or “285/70r18” if a P-metric size.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment