What size tires are on a 1951 Chevy 3100?

Tire Size for a 1951 Chevy 3100
Based on the search results, it is not clear what the original tire size for a 1951 Chevy 3100 is. However, I found information about the tire sizes used on a modified 1951 Chevy 3100 in an article from Classic Trucks Magazine. The front tires were BFGoodrich g-Force Sport 225R4517 and the rear tires were BFGoodrich g-Force Sport 255R4517.
Unfortunately, I couldn’t find specific information about the original tire size for a 1951 Chevy 3100. It is possible that the tire size varied depending on the specific model or trim level. If you are looking for the original tire size, it might be helpful to consult a vintage Chevrolet club or forum for more information.
Please note that the information provided is based on a modified version of the 1951 Chevy 3100 and may not reflect the original tire size.

What tires are wider 50s or 60s?

For example, a 60-series tire features a sidewall that is 60% as tall as the tire’s section width. A 50-series tire will feature a shorter sidewall, at 50% of section width.

What size tires are on a 1953 Chevy 3100?

1953 Chevrolet Truck 2 Dr Standard Cab Pickup3100 (6.00-16) Tires | Town Fair Tire.

How much does a 1951 Chevy 3100 weight?

The 3100 series trucks rode on 116-inch wheelbases and were equipped with 6 x 16 tires. The trucks measured 196.6 inches from tip to tip and the pickups weighed in at 3,120 lbs. They carried a Gross Vehicle Weight (GVW) rating of 4,200 lbs — or 4,800 lbs if you went with the beefier 6.5 x 16 tires.

What size tires are on a 1951 Chevy truck?

The original wheels were 16″ X 4″ (wide). In mid 1951 the wheel width was changed to 4 1/2″ and after that time the 4 1/2 wheel was sold for replacement for the prior years. From 1947-1950 the trucks were also available with a 15″ X 5″ wheel that used a 6.70 X 15 tire.

What size tires does a 1950 Chevy 3100 have?

The standard tire size for a 1950 1/2 ton truck was a 6.00 X16…and it had 6 lug wheels. The wheels were the same as Chevrolet passenger cars used from 1940-48. Being a truck there were many options including heaiver wheel with 15″ truck type tires.

What is the difference between a 1951 Chevy 3100 and 3600?

One way to tell the difference between a 3100 and a 3600 is the lug pattern. The 3600s primarily came with an 8 lug bolt pattern while the 3100s were 6 lugs. This ’51 Chevy has the 8 lug pattern, indicating it is more than likely a 3600 model. Of interest is the driver’s side door.

What size tires are on a 1950 Chevy?

In the case of 1950’s classics, we most often suggest a 205/75R15 for cars that originally came with a 6.70-15 bias ply tire. We also use 205/75R15 radials as a cross reference to original 7.75-15 Corvette tires.

Where can I find the original tire size?

Where can I find my tire size? The tire size for your vehicle and wheels can be found in two places: Sidewall of your tire. Inside frame of the driver side door.

What is the difference between a 1953 Chevy 3600 and 3100?

One of the big differences between a 3100 and a 3600 is that the 3100 frame widens out starting about a foot or so behind the cab while a 3600 frame runs straight back like later trucks do. Not a big deal but the bolts that hold the back of the bed down to the frame will be in a different spot.

What does the 3100 mean on a Chevy truck?

Late 1949 – Hood side emblems no longer read “Thriftmaster” or “Loadmaster”, but are now numbers that designate cargo capacity: 3100 on 1⁄2 ton, 3600 on 3⁄4 ton, 3800 on 1 ton. Serial number codes remain the same as on early 1949.