What size thread are Ford wheel nuts?

Ford Wheel Nut Thread Size
Ford wheel nuts typically use the M12 x 1.5 thread size, with a 60-degree taper seat washer. This is the standard thread size for most Ford cars, except for the S-Max and Galaxy models, which use the M14 x 1.5 thread size. It’s important to ensure the correct fitment for your specific Ford model, as some older models may use different thread sizes. Additionally, genuine Ford alloy wheels have a slightly wider nut hole, requiring nuts with a seat diameter of 28mm, while aftermarket alloy wheels generally have standard 23mm or 24mm wide nut holes .
It’s crucial to match the thread size and pitch accurately to avoid damaging the wheel, as using the wrong thread pitch can cause the lugs to pinch when tightening and not fully engage. Therefore, it’s essential to pay attention to both the thread size and the pitch when selecting wheel nuts for your Ford vehicle.
If you have a Ford Transit van, it’s important to double-check the thread size, as it may require M14 x 2.0 thread instead of the standard M12 x 1.5 thread used in most Ford cars.

Are lug nuts universal thread?

To safely install your wheels, it’s important that the lug nut size matches your vehicle’s requirements. If your lug nuts or lug bolts don’t match your vehicle’s thread pitch, they won’t work on your ride. Lug nut sizes are given in two numbers. The first number is the diameter of the stud.

What size is the thread on a wheel nut?

The thread size is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (1/2″, 9/16″, etc.) or metric (M12, M14, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.

What size are Ford wheel threads?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer. Our Ford replacement alloy wheel nuts are made from high tensile 10.9 grade carbon steel and are bright zinc plated to resist rust.

What thread is Ford lug nuts?

M14x1.5
With a thread size of M14x1. 5, the installation process is quick and straightforward.

Are all lug nuts threaded the same?

As a final word on lug nuts: No, they are not all the same. It’s important not only to make sure that you’re getting the right one but also that you torque it down to manufacturer specifications once you do.

What is the thread pitch of a 2000 F250 lug nut?

Notes: Nut. 14 mm x 2.00 thread size, 13/16″ and 7/8″ hex.

What size lug thread is a Ford F150?

Specification of F150 Wheel Nuts: 14×1. 5 Thread, 13/16 Hex, 40mm Height, Conical 60 Degree Seat.

What size are Ford wheel bolts?

This set of alloy wheel nuts are designed to fit Ford alloy wheels. With a 60 degree taper seat diameter 28mm. M12 x 1.5 thread size and 19mm Hex.

What is the thread pitch of a f250 lug?

Stud Size & Thread Pitch: 14×1. 5.

What is the thread pitch of a Ford Super Duty lug nut?

M14-1.50 Thread
Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, 2.067″ Length, Chrome (Sold by each) (Part No. 611-268)