To determine the size of the spark plug wrench for a Ford Fusion, we can refer to the information provided in the search results.
According to the search results, the size of the spark plug socket for a Ford Fusion is 5/8″ or 16mm [[9]]. This size should be suitable for removing and installing the spark plugs in a Ford Fusion.
Please note that it’s always a good idea to consult the vehicle’s manual or reach out to a professional mechanic for specific instructions and recommendations regarding spark plug replacement.
I hope this helps! Let me know if you have any other questions.
Contents
- What size tool do you need to change spark plugs?
- What tool do I need to replace spark plug?
- What is the spark plug gap on a 2015 Ford Fusion?
- Is 5 8 the same as 16mm?
- What is the spark plug gap on a 2016 Ford Fusion?
- What tool do I need to change spark plugs?
- What size ratchet do I need for spark plugs?
- What size wrench do I need for a spark plug socket?
- What is the best tool to remove spark plugs?
- What size socket fits a 14mm spark plug?
What size tool do you need to change spark plugs?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
What tool do I need to replace spark plug?
Ratchet and Socket Extensions
Regardless of the socket used, you will need a standard ratchet wrench to fully remove the spark plug. And due to their location on certain machines, you may also need one or more socket extensions on hand in order to successfully access those hard-to-reach spaces.
What is the spark plug gap on a 2015 Ford Fusion?
Engine Specifications
| Measurement | Specification |
|---|---|
| Firing order | 1-3-4-2 |
| Compression ratio | 12.3:1 |
| Spark plug gap | 0.051 ± 0.002 in (1.3 ± 0.05 mm) |
| Ignition system | Coil on plug |
Is 5 8 the same as 16mm?
16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch. 19mm = 3/4 inch.
What is the spark plug gap on a 2016 Ford Fusion?
Notes: OEM equivalent design. Laser Iridium spark plug. Gap 0.032″.
What tool do I need to change spark plugs?
The Tools Needed To Change Spark Plugs
- Your vehicle’s owner’s manual.
- A spark plug socket.
- A wobble socket.
- Spark plug boot puller pliers.
- A flexible handle ratchet.
- A torque wrench.
- A spark plug gap gauge.
What size ratchet do I need for spark plugs?
Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.
What size wrench do I need for a spark plug socket?
What size socket do I need to change out spark plugs? For the majority of plugs, you need a 5/8” or 16mm socket. Some Fords use 9/16″ plugs, some newer European and Asian vehicles use 14mm plugs, and there are a few applications that use 7/8″, 13/16″, ¾” or 18mm plugs.
What is the best tool to remove spark plugs?
Ratchet wrench
This common tool is available in assorted drive sizes and configurations (short, standard, long-handled and flex-head). For removing spark plugs, a longer-handle, flex-head ratchet is the way to go, but a standard ratchet will also work. Ratchets with 72 teeth work better in confined spaces.
What size socket fits a 14mm spark plug?
SPARK PLUG SPANNER SOCKET FOR 14mm SPARK PLUGS (21MM SOCKET) WITH T-BAR.
