What size spark plug socket for Honda Civic?

To remove and replace the spark plugs in a Honda Civic, you will need a 14mm spark plug socket. The socket should have a 3/8″ square drive.
Here are the steps to change the spark plugs in a Honda Civic:
1. Remove the HT leads from their housing on the spark plugs. Gently pull them out, making sure to grab them as close to the casing as possible.
2. Use the 14mm spark plug socket and a ratchet with an extension attachment to loosen and remove the spark plugs.
3. Install the new spark plugs by hand, making sure not to cross-thread them. Then, use the spark plug socket and ratchet to tighten them to the recommended torque specification. Be careful not to overtighten the spark plugs.
4. Reinstall the HT leads onto the spark plugs, making sure they are securely seated.
Remember to change the spark plugs at the recommended intervals, which can vary depending on the vehicle and driving conditions. Faulty spark plugs can cause issues such as hard starts, reduced gas mileage, engine misfiring, and lack of acceleration.
I hope this helps! Let me know if you have any other questions.

What size socket is for a 2017 Honda Civic spark plugs?

14mm thin wall socket.

What size is Honda spark plug socket?

As far as I know, every car made since the late 70s uses a 5/8″ spark plug.

What size spark plug socket for Honda Civic Type R?

14mm
14mm Spark Plug Socket.

Are all spark plugs 14mm?

It depends. They’re not all the same, especially if you include small engine and motorcycle plugs. 5/8″ and 13/16″ are the most common. Sometimes you see 3/4″, 18mm, and rarely 15mm.

Is 5 8 the same as 16mm?

16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch. 19mm = 3/4 inch.

What size is the plug on a Honda Civic?

The honda civic oil pan drain plug has a m14 x 1.50 Bolt with a 17mm head.

Do I need a special socket for spark plugs?

Spark Plug Sockets
These special sockets contain rubber isolators inside intended to absorb any possible vibration within and protect the glass featured along the spark plug. Regular sockets do not contain the rubber feature and using them may result in breakage when attempting a spark plug replacement.

What size socket fits a 14mm spark plug?

SPARK PLUG SPANNER SOCKET FOR 14mm SPARK PLUGS (21MM SOCKET) WITH T-BAR.

What size socket is an NGK spark plug?

It’s good practice to confirm your spark plug socket size by checking your owner’s manual. Note that the socket size for NGK spark plugs, which are a common brand, is either 5/8 or 13/16.

What size socket fits a spark plug?

For the majority of plugs, you need a 5/8” or 16mm socket. Some Fords use 9/16″ plugs, some newer European and Asian vehicles use 14mm plugs, and there are a few applications that use 7/8″, 13/16″, ¾” or 18mm plugs. All spark plugs are 6 sided, except some BMW engines.